Dell Support Drivers & Downloads Driver File Formats

Driver Details

XPS ONE 2710 System BIOS
XPS ONE 2710 A10 BIOS for Windows 7 and Windows 8
Release Date 1/22/2013
Importance: Recommended
Version: A10 See Previous Versions

The following formats are available for the file you have selected

File Format: Non-Packaged Download File Download File
File Name:


Description: This file format consists of a BIOS-executable file. To use it, download the file and copy it to a DOS-bootable USB flash drive, then boot the system to the USB flash drive and run the program.
Download Type: HTTP
File Size: 12MB

Previous Versions

<ul><li><b>Dell Version :</b> X28</li></ul>
5/29/2012 10:49:11 AM


XPS ONE 2710 A10 BIOS for Windows 7 and Windows 8

Level of Importance:Recommended

Dell recommends applying this update during your next scheduled update cycle. The update contains feature enhancements or changes that will help keep your system software current and compatible with other system modules (firmware, BIOS, drivers and software).

Important Information

Please run A10.exe directly if you already updated the BIOS to A06, A08 or A09. Attention! Once you upgraded the BIOS to A10. Please DO NOT downgrade the BIOS to any older version. Note! The SATA mode will be changed to AHCI after you flash the BIOS if your system BIOS is A08 or older. This BIOS will automatically detect SATA configuration and set to the correct mode accordingly when you click loading defaults as this --- BIOS Setup > Exit > Load Defaults; Please DO RUN 'Load Defaults' after you update BIOS. Be careful: That BIOS settings will be load to defaults except 'Boot Mode', 'Secure Boot Control' and 'Load Legacy OPROM'.


XPS One 2710
Operating Systems

Applies to

  • Dell XPS One 2710

Fixes & Enhancements

You may run A10.exe if you are already updated to A09 BIOS. 01. Update BIOS copyright string from 2012 to 2013. 02. Fix BIOS flash UI behavior. 03. Fix the table lost of ACPI.

Installation instructions

1. Boot into Windows.
2. Copy A10.EXE onto your desktop.
3. Execute A10.EXE by double click it.
4. Click Update when BIOS Update Program dialogue box pop up.
5. Make sure you don't interrupt the update process.
6. Do not turn off power or disconnect AC power source before update complete.
7. Press Yes to confirm the BIOS version you want to update and to start BIOS Update process.
8. Press Yes and then system will restart after BIOS update complete.            


To ensure the integrity of your download, please verify the checksum value.

This is an optional process and is not required for the downloading and installation of device drivers from this site.

By downloading, you accept the terms of the Dell Software License Agreement.