Um eine Beschädigung Ihres Computers zu vermeiden, sollten Sie ihn während einer BIOS-Aktualisierung niemals ausschalten oder von der Stromquelle trennen. Während der Aktualisierung wird Ihr Computer neu gestartet und Ihnen wird kurzzeitig ein schwarzer Bildschirm angezeigt.
Lesen Sie vor der Aktualisierung die Installationsanweisungen und die unten aufgeführten wichtigen Informationen.
Dell Server System BIOS, A06
AUTOMATISCH INSTALLIERTDiese Datei wurde automatisch im Rahmen einer vor Kurzem erfolgten Aktualisierung installiert. Wenn Probleme auftreten, können Sie die Datei manuell herunterladen und erneut installieren.
Der Inhalt dieser Seite wurde möglicherweise automatisch übersetzt. Füllen Sie das Formular unten auf der Seite aus, um Feedback zu geben.
Diese Datei wurde automatisch im Rahmen einer vor Kurzem erfolgten Aktualisierung installiert. Wenn Probleme auftreten, können Sie die Datei manuell herunterladen und erneut installieren.
900 MHz B0 Stepping BIOS for PE8450.
Empfohlen
Den besten Download für Ihr System suchen
Bitte geben Sie Ihre Produktdetails ein, um die neuesten Treiberinformationen für Ihr System anzuzeigen.
Support suchen
Dell Service-Tag-Nummer oder Modell eingeben
Sie möchten Ihr Produkt suchen? Geben Sie eine Produktkennung ein.Anleitung
Keine Ergebnisse gefunden. Wir konnten für Ihre Suchanfrage keine Ergebnisse finden. Bitte ändern Sie Ihre Suche und versuchen Sie es erneut.
Dieser Treiber ist nicht kompatibel.
Dieser Treiber ist für das ausgewählte Produkt nicht verfügbar. Wählen Sie ein anderes Produkt aus, um Ihre Produktdetails für diesen Treiber erneut einzugeben, oder besuchen Sie die Seite Produktsupport, um alle Treiber für ein anderes Produkt anzuzeigen.
Melden Sie sich bei Windows als AdministratorIn an, um den automatischen Scan zu nutzen. Wenn Sie bereits als AdministratorIn angemeldet sind und diese Meldung angezeigt wird, führen Sie einen Neustart durch.Ihr System wird von Ihrem IT-Administrator verwaltet und die Funktionen sind möglicherweise eingeschränkt.
Weitere Updates finden. Nutzen Sie SupportAssist, um alle aktuellen Treiberupdates für Ihr Gerät zu finden.
Fehlerkorrekturen und Verbesserungen
BIOS Release A06 contains B0 microcode to support 900MHz processors on PE8450.
Dell Technologies empfiehlt, dieses Update zu überprüfen, um festzustellen, ob es für Ihr System gilt. Das Update enthält Änderungen, die sich nur auf bestimmte Konfigurationen auswirken, oder bietet neue Funktionen, die für Ihre Umgebung gelten können aber nicht müssen.
Dateiformat:Extrahiert Dateien direkt auf die lokale Festplatte
Dateiname:B6899R06.exe
Dateigröße:738.85 KB
Dies ist eine große Datei. Abhängig von Ihrer Verbindungsgeschwindigkeit kann das Herunterladen einige Zeit in Anspruch nehmen.
Beschreibung des Dateiformats:
Dieses Dateiformat umfasst ein Dateiarchiv, das in einem Verzeichnis auf der Festplatte dekomprimiert werden kann. Die Installation kann anschließend von diesem Verzeichnis aus durchgeführt werden.
This utility must be executed in a system without memory managers installed. If EMM386, QEMM, 386MAX, or Windows is active, then the FLASH update is not safe. Remove any memory manager or exit Windows before executing the FLASH Memory Update Utility.
I. BIOS Update ---------------
To update the BIOS, do the following:
1. Note the settings of the SETUP parameters. Enter SETUP by hitting the F2 key during boot up. Write down the settings for each of parameters. At the end of the BIOS update process you should set the parameters to default values by hitting the F9 key, and then re-enter these values you have written down.
2. Insert the BIOS Update Diskette into drive A:.
3. Reset the system.
4. System boots the BIOS Update Diskette.
5. Choose option 1 to update the BIOS.
6. System will automatically reboot once the BIOS update is completed. Please remove the floppy diskette from drive A:.
7. Check to make sure the BIOS version is the new version as the system reboots.
8. Enter Setup by pressing the F2 key during boot up. Once in Setup, press the F9 to set the parameters back to default values. Re-enter the values you wrote down at the beginning of this process. If you do not set the CMOS values back to defaults using the F9 key, the system may function erratically.
II. BIOS Recovery ------------------
To recover the BIOS from a corrupted Flash or bad BIOS update, do the following:
1. Turn system power off.
2. Move the BIOS recovery Switch number 2 to the recovery (ON) position.
3. Insert the BIOS recovery diskette containing the latest BIOS files including user binary file.
4. Turn system power on.
5. At this point, the system boots from the DOS-bootable recovery diskette without video display. BIOS emit one beep when it passes control to DOS. DOS then execute a AUTOEXEC.BAT that contains IFLASH.EXE. It emits one high pitched beep to indicate the beginning of the flash operation. After it recovers system BIOS, it emits two high pitched beeps. Then it recovers user binary code. It emits two high pitched beeps to indicate the recovery completed successfully. If the recovery fails, it emits a continuous series of beeps. The entire process takes between three to five minutes.
6. Turn system power off.
7. Remove the recovery diskette.
8. Restore the switch to the original position.
9. Turn system power on for normal operation.
Note: you may encounter a CMOS Checksum error or other problem after reboot. Try shutting down the system and booting up again. CMOS checksum errors require that you enter Setup, check your settings, save your settings, and exit Setup.
Benötigen Sie Hilfe bei BIOS-Problemen?
Sie finden eine Lösung im Dell Benutzerhandbuch zur Verwendung des BIOS und zum Troubleshooting.