Dell MD3000 SAS RAID Controller, v.07.35.39.64, A11
AUTOMATISCH INSTALLIERT Diese Datei wurde automatisch im Rahmen einer vor Kurzem erfolgten Aktualisierung installiert. Wenn Probleme auftreten, können Sie die Datei manuell herunterladen und erneut installieren.Der Inhalt dieser Seite wurde möglicherweise automatisch übersetzt. Füllen Sie das Formular unten auf der Seite aus, um Feedback zu geben.
#######################################################################
Dell PowerVault MD3000 Firmware Generation 2
#######################################################################
======================================================================
Contents
======================================================================
1. Files included in this package
2. Fixes / Enhancements
3. Important Information
4. Firmware upgrade instructions
5. MD1000 Firmware upgrade instructions
======================================================================
1. Files included in this package
======================================================================
Included in your firmware package are the following files:
Default_MD3000_N133X-735890-005.dlp :
Default NVSRAM for MD3000 used in most typical configurations
Single_Port_Clustering_MD3000_N133X-735890-705.dlp :
Single Port MS Cluster NVSRAM for MD3000 that has a single
host port per controller used in clustering configuration
MD3000_FW_RC_07353964_133x.dlp : RAID Controller Firmware
MD1000_A04.bin : MD1000 Firmware
======================================================================
2. Fixes / Enhancements
======================================================================
07.35.39.64
-----------
* Added fix to resolve controller reboot due to insertion of foreign physical disk
* Improved scheduled I/O timing
* Improved controller memory utilization
* Added fix to resolve the controller panic issue caused by memory leak
* Added fix to resolve one corner case in which host I/O requests are not processed for an extended period of time
* Added support for Windows Server 2008 R2 SP1
07.35.31.60
-----------
- New OS support for Windows 2008 R2 Server, SLES 11, SLES 10 U3,
RHEL 4.8, RHEL 5.4.
- Modular Disk Storage Manager enhancements.
Additionally, the following issues have been fixed:
- Excessive Destination Driver Errors with no component listed on
2nd gen firmware
- BBU Learn Cycle fails in Simplex mode
- Learn Cycle failing as “incomplete?
- NX1950 Solution losing connectivity to every device on the network
- Hitachi SATA HDD firmware failing to update
- ESX host with CHAP enabled causes reboot loop when updating to
2nd gen firmware.
- MPP Virtual HBA Driver issue with Oracle ASM
- 2nd gen firmware upgrade utility does not display double byte
characters properly
Please refer to the Dell PowerVault MD3000 RAID Enclosure Hardware
Owner's Manual for removal and installation instructions.
======================================================================
3. Important Information
======================================================================
NOTICE: Prior generation firmware is indicated by version that begins
with 06.xx.xx.xx, and the Generation 2 firmware starts with
07.xx.xx.xx. Existing hardware can be upgraded to the Generation 2
firmware. If updating from 06.xx.xx.xx version to 07.xx.xx.xx version,
the upgrade is one way only; it is not possible to return to prior
generation after starting this upgrade procedure.
NOTICE: Ensure that all Dell PowerVault MD1000 expansion enclosures
being connected to the MD3000 are updated to the latest Dell
PowerVault MD1000 EMM Firmware from support.dell.com. Dell
PowerVault MD1000 EMM Firmware version A03 is the minimum required
firmware level to support connection to the MD3000 array; attaching
an MD1000 with unsupported firmware causes an uncertified condition to
exist on the array. See the updated Hardware Owner''''s Manual on
http://support.dell.com for more information.
NOTICE: Ensure to check the MD3000 system support matrix on
support.dell.com prior to connecting MD1000 enclosures to an MD3000
to ensure supported drives and firmware versions are used.
======================================================================
4. Firmware upgrade instructions
================
Dell PowerVault MD3000 Firmware Generation 2
#######################################################################
======================================================================
Contents
======================================================================
1. Files included in this package
2. Fixes / Enhancements
3. Important Information
4. Firmware upgrade instructions
5. MD1000 Firmware upgrade instructions
======================================================================
1. Files included in this package
======================================================================
Included in your firmware package are the following files:
Default_MD3000_N133X-735890-005.dlp :
Default NVSRAM for MD3000 used in most typical configurations
Single_Port_Clustering_MD3000_N133X-735890-705.dlp :
Single Port MS Cluster NVSRAM for MD3000 that has a single
host port per controller used in clustering configuration
MD3000_FW_RC_07353964_133x.dlp : RAID Controller Firmware
MD1000_A04.bin : MD1000 Firmware
======================================================================
2. Fixes / Enhancements
======================================================================
07.35.39.64
-----------
* Added fix to resolve controller reboot due to insertion of foreign physical disk
* Improved scheduled I/O timing
* Improved controller memory utilization
* Added fix to resolve the controller panic issue caused by memory leak
* Added fix to resolve one corner case in which host I/O requests are not processed for an extended period of time
* Added support for Windows Server 2008 R2 SP1
07.35.31.60
-----------
- New OS support for Windows 2008 R2 Server, SLES 11, SLES 10 U3,
RHEL 4.8, RHEL 5.4.
- Modular Disk Storage Manager enhancements.
Additionally, the following issues have been fixed:
- Excessive Destination Driver Errors with no component listed on
2nd gen firmware
- BBU Learn Cycle fails in Simplex mode
- Learn Cycle failing as “incomplete?
- NX1950 Solution losing connectivity to every device on the network
- Hitachi SATA HDD firmware failing to update
- ESX host with CHAP enabled causes reboot loop when updating to
2nd gen firmware.
- MPP Virtual HBA Driver issue with Oracle ASM
- 2nd gen firmware upgrade utility does not display double byte
characters properly
Please refer to the Dell PowerVault MD3000 RAID Enclosure Hardware
Owner's Manual for removal and installation instructions.
======================================================================
3. Important Information
======================================================================
NOTICE: Prior generation firmware is indicated by version that begins
with 06.xx.xx.xx, and the Generation 2 firmware starts with
07.xx.xx.xx. Existing hardware can be upgraded to the Generation 2
firmware. If updating from 06.xx.xx.xx version to 07.xx.xx.xx version,
the upgrade is one way only; it is not possible to return to prior
generation after starting this upgrade procedure.
NOTICE: Ensure that all Dell PowerVault MD1000 expansion enclosures
being connected to the MD3000 are updated to the latest Dell
PowerVault MD1000 EMM Firmware from support.dell.com. Dell
PowerVault MD1000 EMM Firmware version A03 is the minimum required
firmware level to support connection to the MD3000 array; attaching
an MD1000 with unsupported firmware causes an uncertified condition to
exist on the array. See the updated Hardware Owner''''s Manual on
http://support.dell.com for more information.
NOTICE: Ensure to check the MD3000 system support matrix on
support.dell.com prior to connecting MD1000 enclosures to an MD3000
to ensure supported drives and firmware versions are used.
======================================================================
4. Firmware upgrade instructions
================
Empfohlen
Den besten Download für Ihr System suchen
Bitte geben Sie Ihre Produktdetails ein, um die neuesten Treiberinformationen für Ihr System anzuzeigen.Support suchen
Dell Service-Tag-Nummer oder Modell eingeben
Sie möchten Ihr Produkt suchen? Geben Sie eine Produktkennung ein. Anleitung
Dieser Treiber ist nicht kompatibel.
Dieser Treiber ist für das ausgewählte Produkt nicht verfügbar. Wählen Sie ein anderes Produkt aus, um Ihre Produktdetails für diesen Treiber erneut einzugeben, oder besuchen Sie die Seite Produktsupport, um alle Treiber für ein anderes Produkt anzuzeigen.
Melden Sie sich bei Windows als AdministratorIn an, um den automatischen Scan zu nutzen. Wenn Sie bereits als AdministratorIn angemeldet sind und diese Meldung angezeigt wird, führen Sie einen Neustart durch. Ihr System wird von Ihrem IT-Administrator verwaltet und die Funktionen sind möglicherweise eingeschränkt.
Weitere Updates finden. Nutzen Sie SupportAssist, um alle aktuellen Treiberupdates für Ihr Gerät zu finden.
Fehlerkorrekturen und Verbesserungen
07.35.39.64
-----------
* Added fix to resolve controller reboot due to insertion of foreign physical disk
* Improved scheduled I/O timing
* Improved controller memory utilization
* Added fix to resolve the controller panic issue caused by memory leak
* Added fix to resolve one corner case in which host I/O requests are not processed for an extended period of time
* Added support for Windows Server 2008 R2 SP1
07.35.38.60
-----------
Controller firmware updated with the following features and fixes:
- Added support to allow coexistence of the MD3000 and MD3200 Series arrays
- This support is only for OSes common to both the MD3000 and MD3200 Series arrays
- This support requires execution of addition deployment described in MD3200i White paper
- Added support for the following additional Operating Systems
- SLES 10 SP3
- SLES 11
- SLES 11 SP 1
- RHEL 5 SP 4
- RHEL 5 SP 5
- Added support for 6 Gb/s Hard Drives
Mehr erfahren-----------
* Added fix to resolve controller reboot due to insertion of foreign physical disk
* Improved scheduled I/O timing
* Improved controller memory utilization
* Added fix to resolve the controller panic issue caused by memory leak
* Added fix to resolve one corner case in which host I/O requests are not processed for an extended period of time
* Added support for Windows Server 2008 R2 SP1
07.35.38.60
-----------
Controller firmware updated with the following features and fixes:
- Added support to allow coexistence of the MD3000 and MD3200 Series arrays
- This support is only for OSes common to both the MD3000 and MD3200 Series arrays
- This support requires execution of addition deployment described in MD3200i White paper
- Added support for the following additional Operating Systems
- SLES 10 SP3
- SLES 11
- SLES 11 SP 1
- RHEL 5 SP 4
- RHEL 5 SP 5
- Added support for 6 Gb/s Hard Drives
Version
07.35.39.64, A11
Veröffentlichungsdatum:
26 Sep. 2011
Downloadtyp:
Firmware
Kategorie
SAS RAID
Wichtigkeit
EmpfohlenDell Technologies empfiehlt, dieses Update während Ihres nächsten planmäßigen Updatezyklus durchzuführen. Das Update enthält Änderungen zur Aufrechterhaltung des Gesamtsystemzustands. Es stellt sicher, dass die Systemsoftware aktuell und kompatibel mit anderen Systemmodulen (Firmware, BIOS, Treiber und Software) bleibt und möglicherweise andere neue Funktionen enthält.
Verfügbare Formate
Dateiformat: Extrahiert Dateien direkt auf die lokale Festplatte
Dateiname: MD3000-CFW-NVSRAM_07353964_A11_R315163.zip
Dateigröße: 13.43 MB
Dies ist eine große Datei. Abhängig von Ihrer Verbindungsgeschwindigkeit kann das Herunterladen einige Zeit in Anspruch nehmen.
Beschreibung des Dateiformats:
Dieses Dateiformat umfasst ein Dateiarchiv, das in einem Verzeichnis auf der Festplatte dekomprimiert werden kann. Die Installation kann anschließend von diesem Verzeichnis aus durchgeführt werden.
Um die Integrität Ihres Downloads zu sichern, prüfen Sie bitte den Prüfsummenwert.
MD5:
969f9d98e061cc286f09dace67e10d4b
SHA1:
Nicht verfügbar
SHA-256:
Nicht verfügbar
Mit dem Download stimmen Sie der Dell Softwarelizenzvereinbarung (in Englisch) zu.
Gilt für
ASSY,ENCL,CTL,DHST
ASSY,ENCL,CTL,SGHST
Installationsanweisungen
Custom Instructions for MD3000-CFW-NVSRAM_07353964_A11_R315163.zip:
Download:
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
Extract Files:
6) Browse to the location where you downloaded the file and double-click the open the zip file.
7) Unzip to extract the files to a specified location.
Download:
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
Extract Files:
6) Browse to the location where you downloaded the file and double-click the open the zip file.
7) Unzip to extract the files to a specified location.
Treiber – Hilfe und Lernprogramme
Weitere Downloads finden Sie unter Treiber und Downloads. Hilfe für die Verwendung der Informationen auf dieser Seite finden Sie hier: Treiber – Hilfe und Tutorials.