AUTOMATISCH INSTALLIERTDiese Datei wurde automatisch im Rahmen einer vor Kurzem erfolgten Aktualisierung installiert. Wenn Probleme auftreten, können Sie die Datei manuell herunterladen und erneut installieren.
Der Inhalt dieser Seite wurde möglicherweise automatisch übersetzt. Füllen Sie das Formular unten auf der Seite aus, um Feedback zu geben.
Diese Datei wurde automatisch im Rahmen einer vor Kurzem erfolgten Aktualisierung installiert. Wenn Probleme auftreten, können Sie die Datei manuell herunterladen und erneut installieren.
LS-120 Drive Firmare Utility
Empfohlen
Den besten Download für Ihr System suchen
Bitte geben Sie Ihre Produktdetails ein, um die neuesten Treiberinformationen für Ihr System anzuzeigen.
Support suchen
Dell Service-Tag-Nummer oder Modell eingeben
Sie möchten Ihr Produkt suchen? Geben Sie eine Produktkennung ein.Anleitung
Keine Ergebnisse gefunden. Wir konnten für Ihre Suchanfrage keine Ergebnisse finden. Bitte ändern Sie Ihre Suche und versuchen Sie es erneut.
Dieser Treiber ist nicht kompatibel.
Dieser Treiber ist für das ausgewählte Produkt nicht verfügbar. Wählen Sie ein anderes Produkt aus, um Ihre Produktdetails für diesen Treiber erneut einzugeben, oder besuchen Sie die Seite Produktsupport, um alle Treiber für ein anderes Produkt anzuzeigen.
Melden Sie sich bei Windows als AdministratorIn an, um den automatischen Scan zu nutzen. Wenn Sie bereits als AdministratorIn angemeldet sind und diese Meldung angezeigt wird, führen Sie einen Neustart durch.Ihr System wird von Ihrem IT-Administrator verwaltet und die Funktionen sind möglicherweise eingeschränkt.
Weitere Updates finden. Nutzen Sie SupportAssist, um alle aktuellen Treiberupdates für Ihr Gerät zu finden.
Fehlerkorrekturen und Verbesserungen
This utility updates the firmware on the LS-120 Drive, DP/N 042YKW, used on the Dell PowerEdge 7150 platform. It must be run from the EFI shell.
Dell Technologies empfiehlt, dieses Update zu überprüfen, um festzustellen, ob es für Ihr System gilt. Das Update enthält Änderungen, die sich nur auf bestimmte Konfigurationen auswirken, oder bietet neue Funktionen, die für Ihre Umgebung gelten können aber nicht müssen.
Dateiformat:Ein oder mehr selbstextrahierende Festplattenimages in einem selbstextrahierenden Zip
Dateiname:B6T70600.exe
Dateigröße:493.5 KB
Dies ist eine große Datei. Abhängig von Ihrer Verbindungsgeschwindigkeit kann das Herunterladen einige Zeit in Anspruch nehmen.
Beschreibung des Dateiformats:
Diese Datei umfasst einen Satz komprimierter oder gezippter Dateien. Laden Sie die ZIP-Datei in einen Ordner auf der Festplatte herunter und entpacken Sie sie mit einem Doppelklick. Befolgen Sie die Anweisungen, um die Installation abzuschließen.
1. Get 1 blank, formatted floppy disks. 2. Click the new icon on the desktop. The Self-Extractor window appears. 3. Click Setup. An MS-DOS window appears with a message indicating that you need 1 floppy diskettes. 4. Press the [ENTER] key. A message appears prompting you to insert a blank floppy diskette. Insert a floppy disk into the floppy disk drive. 5. Press the [ENTER] key. A message appears indicating that all data on the disk will be erased. 6. Press the [y] key and then press the [ENTER] key. The files are copied to the floppy diskette. Once the files have been copied to the diskette a message appears prompting you to insert the second diskette. 7. Repeat steps 4 – 6 until you reach the end of the diskette set. 8. After all the files have been copied to the last floppy disk, press the [ENTER] key and the MS-DOS window closes.
The unpack utility is DOS based. Run the executable file on a Windows based machine (not IA64), the following files will be unpacked and copied to a standard 1.44MB formatted floppy.
Place the floppy in the Ls-120 drive and Boot to the EFI Boot Manager Screen Select the EFI Boot option Should see the Device mapping table Look for the FS#'s to identify the Floppy, CDROM, and Hard Drives The LS-120 will have a description of Primary Master or Device 00. The Hard Drive will have a description of Scsi or Device 80. The command "map –r" will remap the devices. If the Device 80 or Scsi is FS1 then type: "FS1:" to change to the hard drive. Type: "dir" to print a directory to the screen. This is the main directory where the files should be copied. Should also see the dellup Directory. Copy the five files to the hard drive, (verify fs0 corresponds to the floppy drive) type: "copy fs0:auto.prm" the response should be fs0:\auto.prm -> fs1:\auto.prm[ok]
Type: "update" the utility will begin the following should appear on the screen.
Beginning Update Process New revision (file): C936M924 Old revision (ROM): C932M923
Note: If the Old revision number does not appear here then this drive cannot be updated !
Continue with the update of the Flash-EEPROM? (y/n) Type: "y"
Loader F/W Revision: 101 Erase Processing Erase OK Write Processing Write OK Flash Load: OK
The flash has completed and you are then returned to the EFI Prompt.