Dell OpenManage Array Manager, v.3.5.0.555.4, A02
AUTOMATISCH GEÏNSTALLEERD Dit bestand is automatisch geïnstalleerd als onderdeel van een recente update. Als u problemen ondervindt, kunt u deze handmatig downloaden en opnieuw installeren.De inhoud van deze pagina is mogelijk automatisch vertaald. Vul het formulier onderaan de pagina in om feedback te geven.
Array Manager software provides a comprehensive storage management solution in an integrated, graphical view. From a single location, Array Manager enables you to configure and manage local and remote storage attached to a server, while the server is online and continuing to process requests.
Aanbevolen
Vind de beste download voor uw systeem
Voer uw productgegevens in om de meest recente driverinformatie voor uw systeem weer te geven.Support zoeken
Voer uw Dell servicetag of model in
Wilt u uw product opzoeken? Voer een product-ID in. Meer informatie
Deze driver is niet compatibel
Deze driver is niet van toepassing op het geselecteerde product. Kies een ander product om uw productinformatie voor deze driver opnieuw in te voeren of ga naar de productsupportpagina om alle drivers voor een ander product weer te geven.
Meld u aan bij Windows als beheerder om automatische scanfuncties te gebruiken. Als u al bent aangemeld als beheerder en dit bericht ziet, start dan opnieuw op.
Uw systeem wordt beheerd door uw IT-beheerder en de functies kunnen beperkt zijn.
Zoek meer updates. Gebruik SupportAssist om alle nieuwste driverupdates voor uw apparaat te vinden.
Probleemoplossingen en verbeteringen
The following issues are corrected in Array Manager Version 3.5:
* Firmware download may not work on the PERC 2, 2/Si, 3/Si, and 3/Di controllers on Windows and NetWare. Firmware download may not work on the Ultra SCSI, Ultra2 SCSI, Ultra160 SCSI, LSI 1020, and LSI 1030 controllers on NetWare.
* Create Volume and Upgrade Disk buttons are enabled on Windows Server 2003.
* Basic disks may disappear under the Disks object in the tree view when initializing a virtual disk.
* DCOM (Distributed Component Object Model)
* Battery fields display "Unknown" in log file.
* Array Manager does not update the Disk View tab at startup on a PERC 3/DC controller.
* Attempts to split a mirror or unmirror a virtual disk may fail.
* Formatting a virtual disk may destroy drive mapping.
* Create virtual disk may fail on PERC 3/Di controllers.
* Attempts to delete a dynamic virtual disk may fail.
* Cannot expand a concatenated virtual disk that fully utilizes an array disk.
Meer lezen
* Firmware download may not work on the PERC 2, 2/Si, 3/Si, and 3/Di controllers on Windows and NetWare. Firmware download may not work on the Ultra SCSI, Ultra2 SCSI, Ultra160 SCSI, LSI 1020, and LSI 1030 controllers on NetWare.
* Create Volume and Upgrade Disk buttons are enabled on Windows Server 2003.
* Basic disks may disappear under the Disks object in the tree view when initializing a virtual disk.
* DCOM (Distributed Component Object Model)
* Battery fields display "Unknown" in log file.
* Array Manager does not update the Disk View tab at startup on a PERC 3/DC controller.
* Attempts to split a mirror or unmirror a virtual disk may fail.
* Formatting a virtual disk may destroy drive mapping.
* Create virtual disk may fail on PERC 3/Di controllers.
* Attempts to delete a dynamic virtual disk may fail.
* Cannot expand a concatenated virtual disk that fully utilizes an array disk.
Versie
3.5.0.555.4, A02
Releasedatum
09 aug. 2004
Downloadtype
Applicaties
Categorie
Systeembeheer
Belang
AanbevolenDell Technologies raadt u aan deze update uit te voeren tijdens uw volgende geplande updatecyclus. De update bevat wijzigingen om de algehele systeemstatus te behouden. De update zorgt ervoor dat de systeemsoftware actueel en compatibel blijft met andere systeemmodules (firmware, BIOS, drivers en software) en bevat mogelijk ook andere nieuwe functies.
Beschikbare bestandsindelingen
Belangrijke informatie weergeven:
Bestandsindeling:
Extraheert bestanden rechtstreeks naar de lokale harde schijf
Bestandsnaam:
a350a02.exe
Bestandsgrootte:
78 MB
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
Deze bestandsindeling bestaat uit een archief van bestanden die kunnen worden gedecomprimeerd in een map op de harde schijf. De installatie kan dan worden gedaan vanuit deze map.
Verifieer de checksum-waarde om de integriteit van uw download te garanderen.
MD5:
Niet beschikbaar
SHA1:
Niet beschikbaar
SHA-256:
Niet beschikbaar
Bestandsindeling:
Externe releaseaantekeningen
Bestandsnaam:
rdm350.txt
Bestandsgrootte:
48.97 KB
Dit is een groot bestand. Afhankelijk van uw verbindingssnelheid kan het downloaden enige tijd duren.
Format-omschrijving:
Deze bestandsindeling bevat onbewerkte tekst die kan worden bekeken met een standaard teksteditor.
Verifieer de checksum-waarde om de integriteit van uw download te garanderen.
MD5:
Niet beschikbaar
SHA1:
Niet beschikbaar
SHA-256:
Niet beschikbaar
Door te downloaden accepteert u de voorwaarden van de softwarelicentieovereenkomst van Dell. (in het Engels)
Belangrijke informatie
Array Manager cannot be installed on a system that has the ASPI 4.7.x driver installed. If you have the ASPI 4.7.x driver installed on your system, you need to remove this driver and install the ASPI 4.6 driver.You can do this by downloading the ASPI 4.6 package from http://support.dell.com. The ASPI 4.6 package uninstalls the ASPI 4.7.x driver and installs the ASPI 4.6 driver. Refer to the documentation of any other applications installed on the system to see if those applications have known problems with the ASPI 4.6 driver.
****************************************************************************
Applications that query the Array Manager Management Information Base (MIB) may experience unpredictable behavior when Array Manager is installed on a system that also has HP OpenView installed.
****************************************************************************
When upgrading your ROMB Controller from version 2.7.1 to version 2.8.0, your 30 Second Timeout setting will change from Enabled to Disabled. When your 30 Second Timeout setting is Disabled, the system will wait indefinitely during boot up for user response in the event the controller array configuration has changed. To change your 30 Second Timeout back to Enable, please follow these steps: 1.) During boot up process, press when the following option appears on screen: <<< Press for Adaptec RAID Configuration Utility! >>> 2.) Using the arrow keys, select SCSISelect Utility and press ENTER. 3.) Using the arrow keys, select Controller Configuration and press ENTER. 4.) Using the arrow keys, select 30 Second Config Change Timeout and press ENTER. 5.) Using the arrow keys, select ENABLED 6.) Press ESC to exit menu and select YES when prompted to save the changes made. 7.) Press ESC twice and select YES when prompted to save the changes made, the system will reboot with new settings.
****************************************************************************
Please see the readme for more important info.
****************************************************************************
Applications that query the Array Manager Management Information Base (MIB) may experience unpredictable behavior when Array Manager is installed on a system that also has HP OpenView installed.
****************************************************************************
When upgrading your ROMB Controller from version 2.7.1 to version 2.8.0, your 30 Second Timeout setting will change from Enabled to Disabled. When your 30 Second Timeout setting is Disabled, the system will wait indefinitely during boot up for user response in the event the controller array configuration has changed. To change your 30 Second Timeout back to Enable, please follow these steps: 1.) During boot up process, press
****************************************************************************
Please see the readme for more important info.
Ondersteunde besturingssystemen
Novell NetWare
Windows Server 2003
Windows NT 4.0
Windows 2000
Windows Powered
Installatie-instructies
Custom Instructions for a350a02.exe:
Custom Instructions for a350a02.exe:
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I
agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file
to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-
click the new file to unzip the download package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract files.
Installation
1. Browse to the folder where extracted the download package.
2. Double click on setup.exe win the “Setup” folder. Setup should start
automatically
3. Follow the instructions shown in the Setup wizard.
Note: If you get an error message saying "An unsupported version of
ASPI has been detected on your system..." you must download the
ASPI 4.6 package from the support.dell.com website. Following the
ASPI 4.6 package instructions will uninstall the ASPI 4.7.x driver and
install the ASPI 4.6 driver, thus enabling installation of Array Manager
3.5.0. Refer to the documentation of any other applications installed on
the system to see if those applications have known problems with the
ASPI 4.6 driver.
4. Reboot the system when finished.
NOTE: When installing the managed system component on a Windows
2000 system, the Windows 2000 Plug and Play Manager will activate
after the reboot, indicating it discovered new hardware. You may be
required to perform a second reboot if volumes are present on your
system. Otherwise, allow Plug and Play to register the new driver. (This
occurs automatically.)
Custom Instructions for rdm350.txt:
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I
agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file
to your hard drive.
Custom Instructions for a350a02.exe:
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I
agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file
to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-
click the new file to unzip the download package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract files.
Installation
1. Browse to the folder where extracted the download package.
2. Double click on setup.exe win the “Setup” folder. Setup should start
automatically
3. Follow the instructions shown in the Setup wizard.
Note: If you get an error message saying "An unsupported version of
ASPI has been detected on your system..." you must download the
ASPI 4.6 package from the support.dell.com website. Following the
ASPI 4.6 package instructions will uninstall the ASPI 4.7.x driver and
install the ASPI 4.6 driver, thus enabling installation of Array Manager
3.5.0. Refer to the documentation of any other applications installed on
the system to see if those applications have known problems with the
ASPI 4.6 driver.
4. Reboot the system when finished.
NOTE: When installing the managed system component on a Windows
2000 system, the Windows 2000 Plug and Play Manager will activate
after the reboot, indicating it discovered new hardware. You may be
required to perform a second reboot if volumes are present on your
system. Otherwise, allow Plug and Play to register the new driver. (This
occurs automatically.)
Custom Instructions for a350a02.exe:
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I
agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file
to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-
click the new file to unzip the download package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract files.
Installation
1. Browse to the folder where extracted the download package.
2. Double click on setup.exe win the “Setup” folder. Setup should start
automatically
3. Follow the instructions shown in the Setup wizard.
Note: If you get an error message saying "An unsupported version of
ASPI has been detected on your system..." you must download the
ASPI 4.6 package from the support.dell.com website. Following the
ASPI 4.6 package instructions will uninstall the ASPI 4.7.x driver and
install the ASPI 4.6 driver, thus enabling installation of Array Manager
3.5.0. Refer to the documentation of any other applications installed on
the system to see if those applications have known problems with the
ASPI 4.6 driver.
4. Reboot the system when finished.
NOTE: When installing the managed system component on a Windows
2000 system, the Windows 2000 Plug and Play Manager will activate
after the reboot, indicating it discovered new hardware. You may be
required to perform a second reboot if volumes are present on your
system. Otherwise, allow Plug and Play to register the new driver. (This
occurs automatically.)
Custom Instructions for rdm350.txt:
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I
agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file
to your hard drive.
Custom Instructions for a350a02.exe:
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I
agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file
to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-
click the new file to unzip the download package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract files.
Installation
1. Browse to the folder where extracted the download package.
2. Double click on setup.exe win the “Setup” folder. Setup should start
automatically
3. Follow the instructions shown in the Setup wizard.
Note: If you get an error message saying "An unsupported version of
ASPI has been detected on your system..." you must download the
ASPI 4.6 package from the support.dell.com website. Following the
ASPI 4.6 package instructions will uninstall the ASPI 4.7.x driver and
install the ASPI 4.6 driver, thus enabling installation of Array Manager
3.5.0. Refer to the documentation of any other applications installed on
the system to see if those applications have known problems with the
ASPI 4.6 driver.
4. Reboot the system when finished.
NOTE: When installing the managed system component on a Windows
2000 system, the Windows 2000 Plug and Play Manager will activate
after the reboot, indicating it discovered new hardware. You may be
required to perform a second reboot if volumes are present on your
system. Otherwise, allow Plug and Play to register the new driver. (This
occurs automatically.)
Help en zelfstudies voor drivers
Ga voor meer downloads naar Drivers en downloads.
Voor hulp bij het gebruik van de informatie op deze pagina, gaat u naar Hulp en zelfstudies voor drivers.