Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Some article numbers may have changed. If this isn't what you're looking for, try searching all articles. Search articles

Dell Networking Force10 스위치에서 흐름 제어를 사용하여 일시 중지 프레임을 구성 및 관리하는 방법

Summary: Dell 스위치에서 일시 중지 프레임을 구성 및 관리하고, Dell 스위치에서 흐름 제어를 구성하며, Dell Force10 스위치에서 흐름 제어를 설정하는 방법

This article may have been automatically translated. If you have any feedback regarding its quality, please let us know using the form at the bottom of this page.

Article Content


Instructions

이 문서에서는 Dell Networking Force10 스위치에서 흐름 제어를 사용하여 일시 중지 프레임을 구성 및 관리하는 방법에 대해 설명합니다.

 

목표

 
1.  일시 중지 프레임 정의
2.  흐름 제어를 활성화하는 방법 
3.  일시 중지 프레임에 대한 인터페이스 통계를 보는 방법

 

일시 중지 프레임 정의

 

이더넷 일시 중지 프레임으로 데이터 전송을 일시적으로 중지할 수 있습니다. 전송 장치가 대상 장치에서 데이터를 수신할 수 있는 속도보다 더 빠르게 데이터를 전송하는 상황이 발생할 수 있습니다. 대상에서 일시 중지 프레임을 소스로 다시 전송하고 일정 시간 동안 전송자의 전송을 중지합니다.

일시 중지 프레임은 IEEE 802.3x에 의해 정의되며 MAC 제어 프레임을 사용하여 일시 중지 명령을 실행할 수 있습니다. 이더넷 일시 중지 프레임은 전이중 방식에서만 지원됩니다.
 
포트가 초과 구독된 경우 이더넷 일시 중지 프레임 흐름 제어는 손실 없는 동작을 보장하지 않습니다.


 

인터페이스에서 우선 순위 흐름 제어(PFC)가 활성화되어 있는 경우 이더넷 일시 중지 프레임 흐름 제어는 지원되지 않습니다.

 

흐름 제어를 활성화하는 방법


시스템이 이더넷 인터페이스에서 802.3x 일시 중지 프레임에 반응하고 생성하는 방식을 제어합니다. 기본값은 rx off tx off입니다.

일시 중지 프레임을 활성화하려면 1 및 10GIG 인터페이스 포트에서 다음 명령을 사용합니다.


 
flowcontrol rx [off | on] tx [off | on] [negotiate]


 
  • rx on -  이 포트에서 수신된 흐름 제어 프레임을 처리합니다.
  • rx off -  이 포트에서 수신된 흐름 제어 프레임을 무시합니다.
  • tx on -  고속 트래픽이 수신될 때 이 포트에서 연결된 장치로 제어 프레임을 전송합니다.
  • tx off -  고속 트래픽이 수신될 때 이 포트에서 연결된 장치로 흐름 제어 프레임이 전송되지 않습니다.


일시 중지 프레임에 대한 인터페이스 통계를 보는 방법
 


이 명령(스로틀)을 사용하여 카운터가 마지막으로 제거된 이후 현재 스로틀 카운트를 볼 수 있습니다.    as pause framesDell Networking Force10 switches report

 

Dell#show interface te 0/1
TenGigabitEthernet 0/1 is down, line protocol is down
Hardware is DellEth, address is 00:01:e8:8b:18:bb
    Current address is 00:01:e8:8b:18:bb
Pluggable media not present
Interface index is 1048708
Internet address is not set
Mode of IPv4 Address Assignment : NONE
DHCP Client-ID :0001e88b18bb
MTU 1554 bytes, IP MTU 1500 bytes
LineSpeed auto
Flowcontrol rx off tx off
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 16:48:20
Queueing strategy: fifo
Input Statistics:
     0 packets, 0 bytes
     0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
     0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts
     0 Multicasts, 0 Broadcasts, 0 Unicasts
     0 runts, 0 giants, 0 throttles
     0 CRC, 0 overrun, 0 discarded
Output Statistics:
     0 packets, 0 bytes, 0 underruns
     0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
     0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts
     0 Multicasts, 0 Broadcasts, 0 Unicasts
     0 throttles, 0 discarded, 0 collisions, 0 wreddrops
Rate info (interval 299 seconds):
     Input 00.00 Mbits/sec,          0 packets/sec, 0.00% of line-rate
     Output 00.00 Mbits/sec,          0 packets/sec, 0.00% of line-rate
Time since last interface status change: 16:46:37

 



 

Article Properties


Affected Product
Force10 MXL Blade, Force10 S25N-S50N, Force10 S25-01-GE-24P, Force10 S25-01-GE-24T, Force10 S25-01-GE-24V, Force10 S50-01-GE-48T-V, Force10 S50-01-GE-48T, PowerSwitch S4810P, PowerSwitch S5000, Force10 S50P, Force10 S55T, Force10 S60-44T , PowerSwitch S6000, Force10 Z9000 ...
Last Published Date

21 Feb 2021

Version

3

Article Type

How To