Přeskočit na hlavní obsah
  • Vkládejte objednávky snadno a rychle
  • Zobrazit objednávky a sledovat stav expedice
  • Vytvořte a přistupujte k seznamu svých produktů
  • Spravujte své profily, produkty a kontakty na úrovni produktů na stránkách Dell EMC pomocí správy společnosti.

Dell Lifecycle Controller GUI v2.30.30.30 User's Guide

Feature matrix

The following table lists the Lifecycle Controller features supported on the 12 th and 13 th generation Dell PowerEdge servers.

Table 1. Feature Matrix
Features supportedDell PowerEdge 12 th generation servers Dell PowerEdge 13 th generation servers
Firmware updateYesYes
Operating system deploymentYesYes
Device configurationYesYes
DiagnosticsYesYes
Server profile backup and exportYesYes
Server profile importYesYes
Part replacementYesYes
Local updatesYesYes
Driver packsYesYes
Hardware inventoryYesYes
Remote services (through WS-Man)YesYes
Unattended operating system installation — Microsoft Windows YesYes
Unattended operating system installation — Red Hat Enterprise Linux 7 YesYes
Deploying an operating system using UEFI Secure Boot  Yes
Enhanced repurpose or retire server
  • NOTE: Specific component selection is not supported on the Dell's 12th generation of PowerEdge servers. For more information on this feature, see Repurpose or retire system.
YesYes
  • NOTE: The following features are supported on the 12th generation PowerEdge servers only if iDRAC and Lifecycle Controller versions are 2.10.10.10 or later:
    • Unattended operating system installation — Red Hat Enterprise Linux 7
    • Enhanced repurpose or retire server

Hodnoťte tento obsah

Přesné
Užitečné
Snadno srozumitelné
Byl tento článek užitečný?
0/3000 characters
  Zadejte hodnocení (1 až 5 hvězdiček).
  Zadejte hodnocení (1 až 5 hvězdiček).
  Zadejte hodnocení (1 až 5 hvězdiček).
  Vyberte, zda vám článek pomohl či nikoli.
  Komentáře nesmí obsahovat tyto speciální znaky: <>() \