- Notes, cautions, and warnings
- Summary of Revisions
- Introduction
- Getting Started: Learning INI File Basics
- Parameters for WNOS INI Files Only
- Parameters for WNOS INI, {username} INI, and $MAC INI Files
- Connect Parameter: Options
- TimeZone Parameter: Values
- Best Practices: Troubleshooting and Deployment Examples
Reference Guide Dell Wyse ThinOS Release 8.3.1 – INI Files
RDP Connect Options
Table shown here contains the supported options used for RDP connections after you use the Connect=RDP parameter/selection.
-
IMPORTANT:
If an option has an underlined value (default), that option and default value will automatically be used with Connect=RDP; options without underlined values can also be used if you want to, but are not automatically used with Connect=RDP. In addition, when using options, you can leave the default value or change it to another value shown.
For example, in the following case where:
Connect=RDP
[Option1={ 0, 1}]
[Option2={1, 2, 3, 4}]
Since you are using Connect=RDP, then Option1 and its default value 0 will automatically be used as Option1 has an underlined value (default of 0). You can still use Option2 if you want to, however, Option2 is not automatically used with the parameter as Option2 does not have a default (underlined) value.
-
NOTE:
Any option in Table 9: RDP Connect Options that is used in a {username}.ini file will return to the default value set for that option in the wnos.ini file after a user sign-off.
For example, if your {username}.ini file contains the option Reconnect=yes (so that a lost connection will restart 20 seconds after disconnection) and you sign off of the thin client, then the Reconnect value will return to the original default value of no (Reconnect=no) contained in the wnos.ini file—so that others who sign in can use their own user profile assuming the administrator has not changed the default values in the wnos.ini file.
Zadejte hodnocení (1 až 5 hvězdiček).
Zadejte hodnocení (1 až 5 hvězdiček).
Zadejte hodnocení (1 až 5 hvězdiček).
Vyberte, zda vám článek pomohl či nikoli.
Komentáře nesmí obsahovat tyto speciální znaky: <>() \