Dell OpenManage Server Administrator Version 7.4 Command Line Interface Guide

Description	Prepares a physical disk for removal.
Syntax	`omconfig storage pdisk action=remove controller=id pdisk=< PDISKID>`, where id is the controller ID. The <PDISKID> variable specifies the physical disk. NOTE: To obtain these values, type omreport storage controller to display the controller IDs and then type omreport storage pdisk controller=ID to display the IDs for the physical disks attached to the controller.
Example to	Prepares physical disk 3 on connector 0 of controller 1 for removal. On a SAS controller, the physical disk resides in enclosure 2.
Example for SCSI, SATA, and ATA controllers	`omconfig storage pdisk action=remove controller=1 pdisk=0:3`
Example for SAS controllers	`omconfig storage pdisk action=remove controller=1 pdisk=0:2:3`

Omconfig Prepare To Remove Physical Disk