- Notes, cautions, and warnings
- Before working inside your computer
- After working inside your computer
- Removing the base cover
- Replacing the base cover
- Removing the battery
- Replacing the battery
- Removing the coin-cell battery
- Replacing the coin-cell battery
- Removing the hard drive
- Replacing the hard drive
- Removing the wireless card
- Replacing the wireless card
- Removing the display assembly
- Replacing the display assembly
- Removing the I/O board
- Replacing the I/O board
- Removing the speakers
- Replacing the speakers
- Removing the status-light board
- Replacing the status-light board
- Removing the solid-state drive
- Replacing the solid-state drive
- Removing the touchpad
- Replacing the touchpad
- Removing the system board
- Replacing the system board
- Removing the power-adapter port
- Replacing the power-adapter port
- Removing the palm-rest and keyboard assembly
- Replacing the palm-rest and keyboard assembly
- Downloading drivers
- System setup
- Troubleshooting
- Getting help and contacting Dell
Willkommen
Dell Standorte
Dell Standorte
Willkommen bei Dell
Mein Konto
- Bestellungen schnell und einfach aufgeben
- Bestellungen anzeigen und den Versandstatus verfolgen
- Erstellen Sie eine Liste Ihrer Produkte, auf die Sie jederzeit zugreifen können.
- Verwalten Sie mit der Unternehmensverwaltung Ihre Dell EMC Seiten, Produkte und produktspezifischen Kontakte.
Inspiron 14 7000 Service Manual
Procedure
- Align the screw holes on the touch pad with the screw holes on the palm rest and keyboard assembly.
- Replace the four screws (M2x2) that secure the touch pad to the palm rest and keyboard assembly.
- Align the screw holes on the touch-pad bracket with the screw holes on the palm rest and keyboard assembly.
- Replace the three screws (M2x3) that secure the touch-pad bracket to the palm rest and keyboard assembly.
- Adhere the tape that secures the touch-pad bracket to the palm rest and keyboard assembly.
- Slide the status-light board cable into the connector on the system board and close the latch to secure the cable.
- Adhere the tape that secures the touch pad to the palm rest and keyboard assembly.
- Slide both ends of the touch-pad cable into their respective connectors on the touch-pad assembly and system board and close the latches to secure the cable.
Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
Bitte geben Sie an, ob der Artikel hilfreich war.
Die folgenden Sonderzeichen dürfen in Kommentaren nicht verwendet werden: <>()\