Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell Shared PowerEdge RAID Controller 8 Cards For Dell PowerEdge VRTX Systems User’s Guide

PDF

Installing the Shared PERC 8 Internal card

  • CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.
  1. Align one end of the card with the card holder on the system board.
  2. Lower the other end of the card into the card holder on the system board.
    • CAUTION: Applying pressure on the heat sink or battery while seating the Shared PERC 8 Internal card may cause damage to the card. Use only the touch points to seat the card.
  3. Press the touch points on the card and push the card until it is fully seated. When the card is fully seated, the release levers snap over the edge of the card.
    • NOTE: Before closing the system, ensure that the release levers have snapped over the edge of the card.
  4. Close the system.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\