- Notes, Cautions, and Warnings
- Introduction
- Command Syntax Overview
- SYSCFG
- Features
- SYSCFG General Options
- SYSCFG For BIOS
Configuration
- SYSCFG Options
On PowerEdge Systems Prior To PowerEdge 12G Systems
- --acpower
- --adjcacheprefetch
- --asset
- --assignintr
- --bezelir
- --bootmode
- --bootseq
- --bootseqretry
- --cmosdefaults
- --conboot
- --conred
- --conterm
- --coreperformanceboost
- --cpucle
- --cpucore
- --cpuxdsupport
- --cstates
- --datareuse
- --dbpm
- --dcustreamerprefetcher
- --devseq
- --embhypervisor
- --embideraid
- --embnic1
- --embnic2
- --embnic3
- --embnic4
- --embnic1nic2
- --embnic3nic4
- --embnics
- --embnic1pxe
- --embnic2pxe
- --embsataraid
- --embscsi1
- --embscsi2
- --embscsiraid
- --embscsiraidchb
- --embsdcardredundancy
- --extserial
- --embsdcard
- --embvideoctrl
- --fiberchannel
- --f1f2promptonerror
- --floppy
- --formfactor
- --fsbr
- --hddfailover
- --hpcmode
- --htassist
- --hwprefetcher
- --idecdrom
- --idracgui
- --integratedraid
- --integratedsas
- --inteltxt
- --internalusb
- --ioat
- --lcd
- --logicproc
- --lpt
- -memdynamicpower
- --memintleave
- --memoperatingmode
- --memprefailurenotify
- --memremap
- --memtest
- --mouse
- --nextboot
- -noraidprompt*
- --numlock
- --oldsetuppwd
- --oldsyspwd
- --opticaldrivectrl
- --oswatchdogtimer
- --ovrwrt*
- power
- --powerbutton
- --qpibandwidthpriority
- --redmem
- --remflashmedia
- --rptkeyerr
- --sata0
- --sata1
- --sata2
- --sata3
- --sata4
- --sata5
- --sata6
- --sata7
- --snoopfilter
- --serial1
- --serial2
- --serialcomm
- --serialportaddrsel
- --setuppwd
- --sma
- --slotname*
- --sriov
- --svctag*
- --syspwd
- --sysrev
- tpm
- --turbomode
- --usb
- --usbflash
- --usbports
- --virtualization
- --vflash
- Sub Options And Arguments For tpm Option
- Sub Options And Arguments For tcm Option
- Sub Options And Arguments For power Option
- SYSCFG Options On PowerEdge 12G Systems
- SYSCFG Options
On PowerEdge Systems Prior To PowerEdge 12G Systems
- SYSCFG For BMC
And Remote Access Controller Configuration
- bmcversion
- chassistype*
- clearsel*
- controlpanelaccess
- deviceguid*
- encryptkey
- identify
- idracversion
- kvmstatusonlcd
- lancfgparams
- lanchannelaccess
- lanchannelinfo
- lanuseraccess
- --lcd1
- --lcd2
- loaddefaults*
- nextboot
- nmibutton
- passwordaction
- pefcfgparams
- powerbutton
- powerctl
- racreset*
- serialcfgparams
- serialchannelaccess
- serialchannelinfo
- serialuseraccess
- solaction
- solcfgparams
- ssninfo
- useraction
- username
- version*
- virutualmedia
- SYSCFG For State Configuration
- SYSCFG for System Configuration
- SYSCFG For IPv6 Configuration
- PCI Reporting
- RAIDCFG
- Features
- Supported RAID Controllers
- RAIDCFG Options And Arguments
- RAID Configuration
Utility Options And Arguments
- General Help
- Enumerating RAID Controllers
- Creating Virtual Disks
- Enumerating Array Disks
- Blinking And Unblinking Array Disks
- Enumerating Virtual Disks
- Deleting Virtual Disks
- Setting A Virtual Disk As Bootable Virtual Disk
- Blinking And Unblinking Virtual Disks
- Setting Virtual Disk Name
- Setting Environment Variables
- RAID Replication Options
- Assigning, Unassigning, And Listing Global Hot Spares
- Importing And Clearing Foreign Configurations
- Initializing Virtual Disks
- Resetting The Controller
- Enabling And Disabling Persistent Dedicated Hot Spares
- Setting And Displaying The PCIe Link Speed
- Miscellaneous Options
- Quick Reference To RAIDCFG Commands
- UPINIT
- Messages And Codes
- BMC Platform Events Filter Alert Messages
- Sample File Formats
Dell OpenManage Deployment Toolkit Version 4.3 Command Line Interface Reference Guide
--lpt
| Option | --lpt |
| Valid Arguments | lpt1, lpt2, lpt3, disable |
| Description |
Configures or reports the I/O address of the LPT (parallel) port. This option is available on all supported systems with an LPT port. This option is recorded to an output file for replication. Example: A:>syscfg --lpt=lpt1 lpt=lpt1 |
| Applicable Systems | All PowerEdge systems prior to PowerEdge 12G systems. |
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\