Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell PowerVault MD 32XX/36XX Series Storage Arrays CLI Guide

PDF

Show RAID Controller Module NVSRAM

Description

This command returns a list of the NVSRAM byte values for the specified host type. If you do not enter the optional parameters, this command returns a list of all NVSRAM byte values.

Syntax

show (allControllers | controller [(0 | 1)]) NVSRAM [hostType=(
                                 
                                 hostTypeIndexLabel | host="
                                 hostName")]

Parameters

Parameter Description
allControllers Returns information about both RAID controller modules in the storage array.
controller Returns information about a specific RAID controller module in the storage array. Valid RAID controller module identifier values are 0 and 1. The identifier value is 0 for the RAID controller module on the top and 1 for the RAID controller module on the bottom when viewed from the rear of the enclosure. You must put brackets ([ ]) around the RAID controller module identifier.
hostType Specifies the index label or number of the host type. Use the show storageArray hostTypeTable command to generate a list of available host type identifiers.
host Specifies the name of the host connected to the RAID controller modules. You must put quotation marks (" ") around the host name.
  • NOTE: Use the show controller NVSRAM command to display parts or all of the NVSRAM before using the set controller command to change NVSRAM values.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\