Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Precision 5520 Owner's Manual

Removing the Fans

Steps

  1. Follow the procedures in Before Working Inside Your Computer.
  2. Remove the:
    1. Base cover
    2. battery
  3. Perform the following steps to remove the left video-card fan:
    1. Disconnect the fan cable from the system board [1].
    2. Remove the two M2x4 screws that secure the fan to the system board[2].
    3. Lift the fan away from the computer [3]
    Figure showing removing the left system fan from the computer.
  4. Perform the following steps to remove the right system fan:
    1. Un-thread the LVDS cable from its restraints [1].
    2. Disconnect the fan cable from the system board [2]
    3. Remove the two M2x4 screws that secure the fan to the computer [3].
    4. Lift the fan away from the computer [4].
    Figure showing removing the right system fan from the computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\