Dell OpenManage Deployment Toolkit Version 4.3 Command Line Interface Reference Guide

RACADM Firmware Error Codes And Messages

Table below lists RACADM firmware error codes and messages.

Table 1. RACADM Firmware Error Codes and Messages
Error Code	Message
`1`	`UNKNOWN COMMAND.`
`2`	`OUTPUT ERROR`
`3`	`TOO FEW ARGUMENTS`
`4`	`UNKNOWN PARAMETER`
`5`	`CAN'T LOCK RESOURCE`
`6`	`RESOURCE LOCKED`
`7`	`USER NOT IN DATABASE`
`8`	`WRONG PASSWORD`
`9`	`LOGIN INCORRECT`
`10`	`NOT ACCESSIBLE VIA TELNET CONNECTION`
`11`	`ACCESS DENIED`
`12`	`INVALID ARGUMENT`
`13`	`INVALID GROUP NAME`
`14`	`USER DATABASE FULL`
`15`	`CAN'T CHANGE FACTORY DEFAULT`
`16`	`USER ALREADY IN DATABASE`
`17`	`CLOSING TELNET CONNECTION`
`18`	`USER DATABASE NOT INITIALIZED`
`19`	`INVALID COMMAND SHELL CALL`
`20`	`INVALID INPUT FILE`
`21`	`TFTP ERROR`
`22`	`PCI ERROR`
`23`	`SERVER IS IN GRAPHICS MODE`
`24`	`SYSTEM DATE AND TIME NOT SET`
`25`	`OUT OF MEMORY`
`26`	`ACCESS LOCKED`
`27`	`PAGING ERROR`
`28`	`PAGING ALREADY IN PROGRESS`
`29`	`ERROR ACCESSING DEVICE`
`30`	`WRONG NUMBER OF ARGUMENTS`
`31`	`NO SCREEN FOR ASR STORED`
`32`	`CAN'T ADD HISTORY MONITOR`
`33`	`INVALID IDENTIFIER`
`34`	`CANNOT WRITE TO FLASH`
`35`	`FIRMWARE FILE INVALID`
`36`	`CANNOT READ REGISTER`
`37`	`CANNOT UNLOCK RESOURCE`
`38`	`TIME OUT`
`39`	`SERVER IN TEXT MODE`
`40`	`WRONG GRAPHICS MODE`
`41`	`CONFIG SPACE LOCKED`
`42`	`MASTER LOCKED`
`43`	`ASB BUS LOCKED`
`44`	`HISTORY MONITORS NOT YET AVAILABLE`
`45`	`NO VALID VALUE FOR THIS FIELD`
`46`	`DIAGNOSTIC TASK ERROR`
`47`	`DIAGNOSTIC TASK IS ALREADY RUNNING`
`48`	`NO DIAGNOSTIC TASK RUNNING`
`49`	`READ ONLY`
`50`	`SNARFING IS NOT AVAILABLE`
`51`	`TEXT RESOLUTION OF SERVER CHANGED`
`52`	`MODULE NOT LOADED`
`53`	`IPMI ERROR`
`54`	`ERROR IN DIAGNOSTIC FUNCTION`