- Notes, Cautions, and Warnings
- Introduction
- Prerequisites And Deployment
- Downloading
DTK
- Extracting DTK Components On Systems Running Windows
- Extracting DTK Components On Systems Running Linux
- DTK Contents
- Sample Configuration Files For Windows
- Sample Configuration Files For Linux
- Sample Scripts For Systems Running Windows
- Sample Scripts For Systems Running Linux
- RPMs
- Documentation
- Drivers And Dell Real Mode Kernel
- Setting Up A
Directory Structure For Deployment
- DTK Utilities And Files
- System-Specific Files
- Operating System
Installation Files
- Creating Operating System Installation Directories On Systems Running Windows Server 2008 Operating System
- Creating Operating System Installation Directories For Systems Running Windows Server 2012 Operating System
- Creating Operating System Installation Directories For Systems Running Supported Linux Operating Systems
- Preparing The
Script Files
- Using The Sample DTK Scripts To Run A Full Deployment
- Editing The
Sample Batch Files To Perform A Complete System Deployment
- Scripts For Deployment On Systems Running Windows
- Scripts For Deployment On Systems Running Linux
- Replication Scripts For Deployment On Systems Running Windows Operating System
- Replication Scripts For Deployment On Systems Running Linux Operating System
- Deployment Scripts For Systems Running Windows Operating Systems
- Deployment Scripts For Systems Running Linux Operating Systems
- Other Scripts For Systems Running Windows Operating Systems
- Other Scripts For Systems Running Linux Operating Systems
- Editing Example Of TKENVSET And tkenvset
- Editing DTK Task Scripts
- Using DTK Sample Scripts To Capture Configuration Information
- Preparing The Operating System Installation Scripts
- Running The
Deployment Scripts
- Media-Based Local Deployment For Systems Running Microsoft Windows
- Media-Based Local Deployment With Networking Enabled For Systems Running Windows
- Deployment Using Removable Boot Media With A Network Connection (Media-Based) For Systems Running Windows
- Deployment Using Removable Boot Media Without A Network (Media-Based) Connection For Systems Running Windows
- Network Based Deployment For Systems Running Windows
- Using A Third-Party Deployment Solution Framework For Systems Running Windows
- Deployment Using Dell Provided Embedded Linux
- Deployment Using Customized Embedded Linux
- Using A Third-Party Deployment Solution Framework For Systems Running Linux
- Running Dell Update Packages On Systems Running Embedded Linux
- Known Issues And Frequently Asked Questions
Dell OpenManage Deployment Toolkit Version 4.3 User's Guide
Editing The Sample Batch Files To Perform A Complete System Deployment
The sample scripts utilize DTK utilities, the additional supporting utilities, the source system configuration files, the target system hardware drivers, and the operating system installation files to perform a full deployment on the target system.
The sample scripts provided with DTK can be edited and customized
using any ASCII text editor that conforms to the hardware available
on the target systems. While it is recommended that you use DTK sample
scripts to automate your deployment tasks, you can create your own
system deployment batch files using any ASCII text editor by incorporating
the various DTK utilities and commands in the batch file.
Each of the utilities, scripts, and system configuration files are described below. Depending on your requirements, you may use all or only some of them in your deployment. You can write your master deployment file to perform a full deployment on a system with the help of utilities, scripts, and configuration files. This file is not provided with the sample scripts.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\