Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In

XPS 8910 Service Manual

PDF

Procedure

CAUTION: To avoid damaging the wireless card, do not place any cables under it.
  1. Align the notch on the wireless card with the tab on the wireless-card slot.
  2. Slide the wireless card at an angle into the wireless-card slot.
  3. Connect the antenna cables to the wireless card.
    The following table provides the antenna-cable color scheme for the wireless card supported by your computer.
    Table 1. Antenna-cable color schemeThe table provides the antenna-cable color scheme for the wireless card supported by your computer.
    Connectors on the wireless cardAntenna-cable color
    Main (white triangle)White
    Auxiliary (black triangle)Black
  4. Align the screw hole on the wireless-card bracket with the screw hole on the wireless card and the system board.
  5. Replace the screw that secures the wireless-card bracket to the wireless card and the system board.
    Figure 1. Replacing the wireless card
    Image: Replacing the wireless card
    1. wireless card
    2. notch (2)
    3. tab
    4. system board
    5. wireless card slot
    6. wireless card bracket
    7. antenna cables
    8. M2x2.5 screw

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\