Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell OpenManage Server Administrator Handbuch für die Befehlszeilenoberfläche Version 7.4

PDF

BIOS-Setup-Einstellungen auf PowerEdge-G12-Systemen

Die folgende Tabelle führt die auf PowerEdge G12-Systemen unterstützten BIOS-Setup-Attribute auf. Auf PowerEdge G12-Systemen werden die Attribute gruppiert. Je nach Hardwarekonfiguration können die möglichen Attribute in einer bestimmten Gruppe unterschiedlich sein. Der Befehl omconfig chassis biossetup zeigt die Nur-Lesen-Attribute nicht an.
  • ANMERKUNG: Falls Sie das Setup-Kennwort konfiguriert haben, stellen Sie immer dasselbe ein, wenn Sie BIOS-Einstellungen konfigurieren.
Tabelle 1. BIOS-Setup-Einstellungen auf PowerEdge G12-Systemen
Gruppe name=Wertpaar 1 attribute= name=Wertpaar 2 setting=
BIOS Boot Settings (BIOS-Starteinstellungen) attribute=BootSeq sequence=aliasname1, aliasname2,..... aliasnameN
  attribute=HddSeq sequence=aliasname1, aliasname2,..... aliasnameN
Boot Settings (Starteinstellungen) attribute=bootMode setting=Bios | Uefi
  attribute=BootSeqRetry setting=Enabled | Disabled
Integrierte Serververwaltung attribute=FrontLcd setting=None | UserDefined | ModelNum | Advanced
  attribute=UserLcdStr setting=< Zeichenkette>
Integrierte Geräte attribute=EmbVideo setting=Enabled | Disabled
  attribute=IntegratedNetwork1 setting=Enabled | DisabledOs
  attribute=IntegratedNetwork2 setting=Enabled | DisabledOs
  attribute=IntegratedRaid setting=Enabled | Disabled
  attribute=IntegratedSas setting=Enabled | Disabled
  attribute=InternalSdCard setting=on | off
  attribute=InternalSdCardRedundancy setting=Mirror | Disabled
  attribute=InternalUsb setting=on | off
  attribute=InternalUsb1 setting=on | off
  attribute=InternalUsb2 setting=on | off
  attribute=IoatEngine setting=Enabled | Disabled
  attribute=OsWatchdogTimer setting=Enabled | Disabled
  attribute=SriovGlobalEnable setting=Enabled | Disabled
  attribute=UsbPorts setting=AllOn | OnlyBackPortsOn | AllOff
Speichereinstellungen attribute=MemOpMode setting=OptimizerMode | SpareMode | MirrorMode |AdvEccMode | SpareWithAdvEccMode
  attribute=MemOpVoltage setting=AutoVolt | Volt15V
  • ANMERKUNG: Volt15V steht für 1,5 Volt.
  attribute=MemTest setting=Enabled | Disabled
  attribute=NodeInterleave setting=Enabled | Disabled
  attribute=SerialDbgOut setting=Enabled | Disabled
  attribute=SysMemSize setting=< Zeichenkette>
  attribute=SysMemSpeed setting=< Zeichenkette>
  attribute=SysMemType setting=< Zeichenkette>
  attribute=SysMemVolt setting=< Zeichenkette>
  attribute=VideoMem setting=< Zeichenkette>
Verschiedene Einstellungen attribute=AssetTag setting=< Zeichenkette>
  attribute=Characterization setting=Enabled | Disabled
  attribute=ErrPrompt setting=Enabled | Disabled
  attribute=Numlock setting=on | off
  attribute=ReportKbdErr setting=Report | NoReport
  attribute=SystemUefiShell setting=Enabled | Disabled
One-Time Boot (Einmalstart) attribute=OneTimeBootMode setting=Disabled | OneTimeBootSeq | OneTimeHddSeq | OneTimeUefiBootSeq | OneTimeCustomBootSeqStr | OneTimeCustomHddSeqStr | OneTimeCustomUefiBootSeqStr
  attribute=OneTimeBootSeqDev sequence=aliasname1, aliasname2,..... aliasnameN
  attribute=OneTimeHddSeqDev sequence=aliasname1, aliasname2,..... aliasnameN
  attribute=OneTimeUefiBootSeqDev sequence=aliasname1, aliasname2,..... aliasnameN
Prozessoreinstellungen attribute=DataReuse setting=Enabled | Disabled
  attribute=DcuIpPrefetcher setting=Enabled | Disabled
  attribute=DcuStreamerPrefetcher setting=Enabled | Disabled
  attribute=LogicalProc setting=Enabled | Disabled
  attribute=Proc1Brand setting=< Zeichenkette>
  attribute=Proc1Id setting=< Zeichenkette>
  attribute=Proc1L2Cache setting=< Zeichenkette>
  attribute=Proc1L3Cache setting=< Zeichenkette>
  attribute=Proc1NumCores setting=< Ganzzahl>
  attribute=Proc2Brand setting=< Zeichenkette>
  attribute=Proc2Id setting=< Zeichenkette>
  attribute=Proc2L2Cache setting=< Zeichenkette>
  attribute=Proc2L3Cache setting=< Zeichenkette>
  attribute=Proc2NumCores setting=< Ganzzahl>
  attribute=Proc3Brand setting=< Zeichenkette>
  attribute=Proc3Id setting=< Zeichenkette>
  attribute=Proc3L2Cache setting=< Zeichenkette>
  attribute=Proc3L3Cache setting=< Zeichenkette>
  attribute=Proc3NumCores setting=< Ganzzahl>
  attribute=Proc4Brand setting=< Zeichenkette>
  attribute=Proc4Id setting=< Zeichenkette>
  attribute=Proc4L2Cache setting=< Zeichenkette>
  attribute=Proc4L3Cache setting=< Zeichenkette>
  attribute=Proc4NumCores setting=< Ganzzahl>
  attribute=Proc64bit setting=< Zeichenkette>
  attribute=ProcAdjCacheLine setting=Enabled | Disabled
  attribute=ProcBusSpeed setting=< Zeichenkette>
  attribute=ProcCores setting=Single | All | Dual | Quad | 1 | 2 | 4 | 6 | 8 | 10 | 12 | 14 | 16
  attribute=ProcCoreSpeed setting=< Zeichenkette>
  attribute=ProcExecuteDisable setting=Enabled | Disabled
  attribute=ProcHwPrefetcher setting=Enabled | Disabled
  attribute=ProcVirtualization setting=Enabled | Disabled
  attribute=QpiBandwidthPriority setting=InputOutput | Compute
  attribute=QpiSpeed setting=MaxDataRate | 8GTps | 7GTps | 6GTps
  attribute=RtidSetting setting=Enabled | Disabled
  attribute=EmbSata setting=Off | AtaMode | RaidMode | AhciMode
  attribute=eSataPort1 setting=Off | Auto
  attribute=eSataPort1Capacity setting=< Zeichenkette>
  attribute=eSataPort1DriveType setting=< Zeichenkette>
  attribute=eSataPort1Model setting=< Zeichenkette>
  attribute=SataPortA setting=Off | Auto
  attribute=SataPortACapacity setting=< Zeichenkette>
  attribute=SataPortADriveType setting=< Zeichenkette>
  attribute=SataPortAModel setting=< Zeichenkette>
  attribute=SataPortB setting=Off | Auto
  attribute=SataPortBCapacity setting=< Zeichenkette>
  attribute=SataPortBDriveType setting=< Zeichenkette>
  attribute=SataPortBModel setting=< Zeichenkette>
  attribute=SataPortC setting=Off | Auto
  attribute=SataPortCCapacity setting=< Zeichenkette>
  attribute=SataPortCDriveType setting=< Zeichenkette>
  attribute=SataPortCModel setting=< Zeichenkette>
  attribute=SataPortD setting=Off | Auto
  attribute=SataPortDCapacity setting=< Zeichenkette>
  attribute=SataPortDDriveType setting=< Zeichenkette>
  attribute=SataPortDModel setting=< Zeichenkette>
  attribute=SataPortE setting=Off | Auto
  attribute=SataPortECapacity setting=< Zeichenkette>
  attribute=SataPortEDriveType setting=< Zeichenkette>
  attribute=SataPortEModel setting=< Zeichenkette>
  attribute=SataPortF setting=Off | Auto
  attribute=SataPortFCapacity setting=< Zeichenkette>
  attribute=SataPortFDriveType setting=< Zeichenkette>
  attribute=SataPortFModel setting=< Zeichenkette>
  attribute=SataPortG setting=Off | Auto
  attribute=SataPortGCapacity setting=< Zeichenkette>
  attribute=SataPortGDriveType setting=< Zeichenkette>
  attribute=SataPortGModel setting=< Zeichenkette>
  attribute=SataPortH setting=Off | Auto
  attribute=SataPortHCapacity setting=< Zeichenkette>
  attribute=SataPortHDriveType setting=< Zeichenkette>
  attribute=SataPortHModel setting=< Zeichenkette>
Serielle Kommunikation attribute=ConTermType setting=Vt100Vt220 | Ansi
  attribute=ExtSerialConnector setting=Serial1 | Serial2 | RemoteAccDevice
  attribute=FailSafeBaud setting=115200 | 57600 | 19200 | 9600
  attribute=RedirAfterBoot setting=Enabled | Disabled
  attribute=SerialComm setting=OnNoConRedir | OnConRedirCom1 | OnConRedirCom2 | Off
  attribute=SerialPortAddress setting=Serial1Com1Serial2Com2 | Serial1Com2Serial2Com1 | Com1 | Com2
Slot Disablement (Steckplatzdeaktivierung) attribute=Slot1 setting=Enabled | Disabled | BootDriverDisabled
  attribute=Slot2 setting=Enabled | Disabled | BootDriverDisabled
  attribute=Slot3 setting=Enabled | Disabled | BootDriverDisabled
  attribute=Slot4 setting=Enabled | Disabled | BootDriverDisabled
  attribute=Slot5 setting=Enabled | Disabled | BootDriverDisabled
  attribute=Slot6 setting=Enabled | Disabled | BootDriverDisabled
  attribute=Slot7 setting=Enabled | Disabled | BootDriverDisabled
Systeminformation attribute=SysMfrContactInfo setting=< Zeichenkette>
  attribute=SystemBiosVersion setting=< Zeichenkette>
  attribute=SystemManufacturer setting=< Zeichenkette>
  attribute=SystemModelName setting=< Zeichenkette>
  attribute=SystemServiceTag setting=< Zeichenkette>
Systemprofileinstellungen attribute=MemFrequency setting=MaxPerf | 1600MHz | 1333MHz |1067MHz | 800MHz | MaxReliability
  attribute=MemPatrolScrub setting=Standard | Extended | Disabled
  attribute=MemRefreshRate setting=1x | 2x
  attribute=MemVolt
setting=AutoVolt | Volt15V | Volt135V
  • ANMERKUNG: Volt15V steht für 1,5 Volt und Volt135V steht für 1,35 Volt
  attribute=ProcC1E setting=Enabled | Disabled
  attribute=ProcCStates setting=Enabled | Disabled
  attribute=ProcPwrPerf setting=MaxPerf | MinPwr | SysDbpm | OsDbpm |
  attribute=ProcTurboMode setting=Enabled | Disabled
  attribute=SysProfile setting=PerfPerWattOptimizedOs | PerfPerWattOptimizedDapc | PerfOptimized | Custom | DenseCfgOptimized
Systemsicherheit attribute=AcPwrRcvry setting=On | Off | Last
  attribute=AcPwrRcvryDelay setting=Immediate |User | Random
  attribute=AcPwrRcvryUserDelay setting=< Ganzzahl>
  attribute=AesNi setting=Enabled | Disabled
  attribute=BiosUpdateControl setting=Unlocked | Limited | Locked
  attribute=IntelTxt setting=on | off
  attribute=NmiButton setting=Enabled | Disabled
  attribute=PasswordStatus setting=Locked | Unlocked
  attribute=PwrButton setting=Enabled | Disabled
  attribute=SetupPassword setting=< Zeichenkette>
  attribute=SysPassword setting=< Zeichenkette>
  attribute=TcmActivation setting=NoChange | Activate | Deactivate
  attribute=TcmClear
  • ACHTUNG: Durch das Löschen des TCM gehen alle Schlüssel im TCM verloren. Dies könnte sich auf den Start des Betriebssystems auswirken.
setting=Yes | No
  attribute=TcmSecurity setting=on | off
  attribute=TpmActivation setting=NoChange | Activate | Deactivate
  attribute=TpmClear
  • ACHTUNG: Durch das Löschen des TPM gehen alle Schlüssel im TPM verloren. Dies könnte sich auf den Start des Betriebssystems auswirken.
setting=Yes | No
  attribute=TpmSecurity setting=Off | OnPbm | OnNoPbm
UEFI-Starteinstellungen attribute=UefiBootSeq sequence=aliasname1, aliasname2,..... aliasnameN

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\