Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Latitude E6540 Owner's Manual

Removing the Display Assembly

Steps

  1. Follow the procedures in Before Working Inside your computer.
  2. Remove:
    1. battery
    2. display-hinge cap
    3. base cover
    4. base-corner cover
  3. Disconnect the antenna cables connected to the WLAN card and release it from the routing channel. Disconnect the camera cable from the system board.
    Figure displaying how to remove the WLAN antenna and camera cable from the system board.
  4. Disconnect the LVDS cable and release the LVDS cable and camera cable from the routing channel. Remove them from the computer.
    Figure displaying how to remove the LVDS cable and camera cable from the computer.
  5. Remove the screws that secure the display assembly to the computer.
    Figure displaying how to remove the screw that secures the display assembly to the computer.
  6. Remove the display assembly from the computer.
    Figure displaying how to remove the display assembly from the computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\