Dell PowerVault MD 32XX/36XX Series Storage Arrays CLI Guide

PDF

Start Physical Disk Blink

Description

This command blinks a physical disk by turning on an indicator light on the physical disk. Run the stop physicalDisk blink command to turn off the indicator light on the physical disk.

Syntax

start physicalDisk [
                                 enclosureID,slotID] blink

Parameters

Parameter	Description
physicalDisk	The location of the physical disk that you want to find. For dense expansion enclosures, specify the enclosure ID value and the slot ID value of the physical disk that you want to revive. Enclosure ID values are 0 to 99. Slot ID values are 0 to 31. Enclose the enclosure ID value and the slot ID value in square brackets ([ ]).