Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

iDRAC Service Module 1.0 Installation Guide

PDF

Using The Power CLI

To install the iDRAC Service Module using Power CLI:
  1. Install the supported PowerCLI of ESXi on Windows System.
  2. Copy the ISM-Dell-Web-1.0.0-<bldno>.VIB-<version>i.zip file to the ESXi host.
  3. Navigate to the bin directory.
  4. Run Connect-VIServer and provide the server and other credentials.
  5. Log on to the ESXi host using supported vSphere CLI of ESXi 5.1 or ESXi 5.5 and create a datastore.
  6. Create a folder ISM-Dell-Web-1.0.0-<bldno>.VIB-<version>I on ESXi 5.1 or ESXi 5.5 host under /vmfs/volumes/<datastore_name> directory.
  7. Copy the ESXi zip file on ESXi 5.0 U1 host to /vmfs/volumes/<datastore_name>ISM-Dell-Web-1.0.0-<bldno>.VIB-<version>I directory.
  8. Unzip the zip file in the above specified directory.
  9. Run the following command in Power CLI Install-VMHostPatch -VMHost <VMHost I.P address>- HostPath /vmfs/volumes/<datastore_name>name>/ISM-Dell-Web-1.0.0-<bldno>.VIB-<version>i/ cross_oem-dell-iSM-esxi_1.0.ESXi510-0000-metadata.zip for ESXi 5.1. Install-VMHostPatch -VMHost 10.94.171.97 - HostPath /vmfs/volumes/<datastore_name>name>/ISM-Dell-Web-1.0.0-<bldno>.VIB-<version>i/ cross_oem-dell-iSM-esxi_1.0.ESXi550-0000-metadata.zip for ESXi 5.5.
  10. Reboot the ESXi host.
  11. Run the following command to check if the iDRAC Service Module is installed successfully on the host. esxcli software vib list|grep -i open.
  12. iDRAC Service Module is displayed.
    • NOTE: For more information on Power CLI, see the VMWare official website.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\