- Notes, Cautions, and Warnings
- Introduction
- Prerequisites And Deployment
- Downloading
DTK
- Extracting DTK Components On Systems Running Windows
- Extracting DTK Components On Systems Running Linux
- DTK Contents
- Sample Configuration Files For Windows
- Sample Configuration Files For Linux
- Sample Scripts For Systems Running Windows
- Sample Scripts For Systems Running Linux
- RPMs
- Documentation
- Drivers And Dell Real Mode Kernel
- Setting Up A
Directory Structure For Deployment
- DTK Utilities And Files
- System-Specific Files
- Operating System
Installation Files
- Creating Operating System Installation Directories On Systems Running Windows Server 2008 Operating System
- Creating Operating System Installation Directories For Systems Running Windows Server 2012 Operating System
- Creating Operating System Installation Directories For Systems Running Supported Linux Operating Systems
- Preparing The
Script Files
- Using The Sample DTK Scripts To Run A Full Deployment
- Editing The
Sample Batch Files To Perform A Complete System Deployment
- Scripts For Deployment On Systems Running Windows
- Scripts For Deployment On Systems Running Linux
- Replication Scripts For Deployment On Systems Running Windows Operating System
- Replication Scripts For Deployment On Systems Running Linux Operating System
- Deployment Scripts For Systems Running Windows Operating Systems
- Deployment Scripts For Systems Running Linux Operating Systems
- Other Scripts For Systems Running Windows Operating Systems
- Other Scripts For Systems Running Linux Operating Systems
- Editing Example Of TKENVSET And tkenvset
- Editing DTK Task Scripts
- Using DTK Sample Scripts To Capture Configuration Information
- Preparing The Operating System Installation Scripts
- Running The
Deployment Scripts
- Media-Based Local Deployment For Systems Running Microsoft Windows
- Media-Based Local Deployment With Networking Enabled For Systems Running Windows
- Deployment Using Removable Boot Media With A Network Connection (Media-Based) For Systems Running Windows
- Deployment Using Removable Boot Media Without A Network (Media-Based) Connection For Systems Running Windows
- Network Based Deployment For Systems Running Windows
- Using A Third-Party Deployment Solution Framework For Systems Running Windows
- Deployment Using Dell Provided Embedded Linux
- Deployment Using Customized Embedded Linux
- Using A Third-Party Deployment Solution Framework For Systems Running Linux
- Running Dell Update Packages On Systems Running Embedded Linux
- Known Issues And Frequently Asked Questions
Dell OpenManage Deployment Toolkit Version 4.3 User's Guide
SYSCFG Issues
- Setup passwords and system passwords cannot be cleared using DTK on systems prior to Dell PowerEdge 12G systems.
- On PowerEdge 1950 and 2950 systems with internal USB, you can configure BIOS settings for internal USB Port only if the User Accessible/external (UA) USB ports are set to All Ports On. If the UA USB ports are not set to All Ports On and you try to configure BIOS setting for the internal USB port using SYSCFG, the configuration appears to be successful but the changes do not take effect after the next reboot. If you set the UA USB port from All Ports On to All Ports Off or Only Back Ports On, the USB port is automatically set to Off during the next reboot.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\