XPS 8910 Service Manual

Procedure

1. Remove the chassis-fan cable from the routing guide on the chassis-fan bracket.
2. Disconnect the chassis-fan cable from the system board.
   For more information, see “System-board components”.
3. Remove the screw that secures the chassis-fan bracket to the chassis.
4. Slide the chassis-fan assembly towards the front of the computer to release the fan from the chassis.
5. Lift the chassis-fan assembly off the chassis.

   

   1. routing guide
   2. chassis-fan bracket
   3. #6-32x1/4'' screw
   4. chassis
   5. chassis-fan cable
   6. system board
   7. chassis fan

6. Push the rubber grommets through the holes at each corner of the fan to release the chassis-fan from the bracket.
7. Lift the chassis-fan off the chassis-fan bracket.

   

   1. chassis-fan bracket
   2. chassis-fan