Dell Chassis Management Controller Version 3.0 for PowerEdge VRTX Release Notes

Release 3.0

Fixed an issue causing failure of racresetcfg, when the six RSA-4096 or four RSA-2048, and two 2048 DSA SSH public keys are uploaded to the CMC.

Fixed an issue causing flash Media Status showing as "Version mismatch" during changeover or upgrade of the CMC.
Fixed an issue that caused the Server Profile page to hang when a profile is applied to multiple servers.
Fixed an issue limiting the speed of bNDC ports on some blades to 1 Gb after initial chassis turn on or blade insertion.

Fixed an issue causing failure of RAID10 Virtual Disc (VD) with 8, 12 or 16 drives in creating full VD when the span count 2 is selected.
Fixed an issue with Server/Host operating system (OS) network flap, which occurs occasionally on Modular platforms for a short duration during CMC initialization.
Fixed an issue with Server/Host OS network port off, which occurs after CMC is reset on full-height Modular platforms, when the second network daughter card is not installed.
Fixed an issue causing the CMC Web GUI to become unresponsive while using Active Directory login with WinRM.
Fixed an issue causing memory full condition when the internal log files are oversized.

Fixed an issue with the "getmacaddress -c all” command displaying partial IO Identity values for the Intel Dual Port Network Card 10 GBE.
Fixed an issue with the “getmacaddress –m server-x –t iscsi” command displaying non-iSCSI MAC addresses after using the iSCSI filter.
Fixed an issue with flash media features displaying invalid media for active controllers after restoring the chassis.
Fixed an issue with the external storage expansion where chassis logs and alerts are not generated.

Fixed an issue where CMC sometimes does not notify or show storage changes until a chassis powercycle, CMC reset, or failover is performed.
Fixed an issue where CMC User Interface may become unresponsive while CMC is still accessible through other interfaces such as CLI (SSH, Serial, telnet) and WSMan.

Updated OpenSSL open source package to version 1.0.1j. For more information, refer to OpenSSL Security Advisory [15 Oct 2014] — www.openssl.org/news/secadv_20141015.txt.