Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell OpenManage SNMP Reference Guide Version 8.3

PDF

Remote Flash BIOS Variable Values

This section includes definitions for server administrator-specific variable values used in this section.
Table 1. Remote Flash BIOS State Capabilities Unique
Variable Name: DellRemoteFlashBIOSStateCapabilitiesUniqueDellRemoteFlashBIOSStateCapabilitiesUnique
Data Type: IntegerInteger
Possible Data Values Meaning of Data Value
unknown(1) unknown(1) The remote flash BIOS’s capabilities are unknown.
enableCapable(2) enableCapable(2) The remote flash BIOS can be disabled (offline, a binary 0 value) or enabled (online, a binary 1 value).
notReadyCapable(4) notReadyCapable(4) The remote flash BIOS can be set to indicate not ready.
cancelCapable(8) cancelCapable(8) Flash of BIOS can be canceled.
enableAndCancelCapable(10) enableAndCancelCapable(10) Flash of BIOS can be enabled or canceled.
Table 2. Remote Flash BIOS State Settings
Variable Name: DellRemoteFlashBIOSStateSettingsUniqueDellRemoteFlashBIOSStateSettingsUnique
Data Type: IntegerInteger
Possible Data Values Meaning of Data Value
unknown(1) unknown(1) The remote flash BIOS’s capabilities are unknown.
enabled(2) enabled(2) The remote flash BIOS update is disabled (offline, a binary 0 value) or enabled (online, a binary 1 value).
notReady(4) notReady(4) The remote flash BIOS’s state is not ready.
canceled(8) canceled(8) The remote flash BIOS has been canceled.
pending(16) pending(16) The remote flash BIOS update is pending.
other(32) other(32) The remote flash BIOS state/setting is not one of the previous values.
Table 3. Remote Flash BIOS Completion Code
Variable Name: DellRemoteFlashBIOSCompletionCodeDellRemoteFlashBIOSCompletionCode
Data Type: IntegerInteger
Possible Data Values Meaning of Data Value
completionCodeIsOther(1) completionCodeIsOther(1) The completion code status is not one of the following:
completionCodeIsUnknown(2) completionCodeIsUnknown(2) The completion code is unknown (not known or not monitored).
completionCodeIsOK(3) completionCodeIsOK(3) This completion code completed successfully.
completionCodeIsBadImage(4) completionCodeIsBadImage(4) This completion code is a bad flash BIOS image.
completionCodeIsNoFileAccess(5) completionCodeIsNoFileAccess(5) Flash BIOS could not be accessed.
completionCodeIsNotReady(6) completionCodeIsNotReady(6) Flash BIOS memory not ready.
completionCodeIsDisabled(7) completionCodeIsDisabled(7) Flash BIOS is currently disabled.
completionCodeIsNoBattery(8) completionCodeIsNoBattery(8) A battery must be installed.
completionCodeIsNoChargedBattery(9) completionCodeIsNoChargedBattery(9) A fully charged battery must be installed.
completionCodeIsNoExternalPower(10) completionCodeIsNoExternalPower(10) An external power adapter must be connected.
completionCodeIsNo12VoltSet(11) completionCodeIsNo12VoltSet(11) 12 volts (V) could not be set.
completionCodeIsNo12VoltRemoval(12) completionCodeIsNo12VoltRemoval(12) 12 V could not be removed.
completionCodeIsFlashMemoryFailed (13) completionCodeIsFlashMemoryFailed (13) A flash memory failure occurred.
completionCodeIsGeneralFailure(14) completionCodeIsGeneralFailure(14) A general failure occurred.
completionCodeIsDataMiscompare(15) completionCodeIsDataMiscompare(15) A data miscompare error occurred.
completionCodeIsNoImageFound(16) completionCodeIsNoImageFound(16) The flash BIOS image could not be found in memory.
completionCodeIsNoUpdatePerformed (17)completionCodeIsNoUpdatePerformed (17) No update operation has been performed.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\