Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Latitude 7285 2-in-1 Owner's Manual

PDF

Installing the display panel

  1. Place the display panel on a plane surface.
  2. Connect the display cable to the connector on the system board.
    • NOTE: Make sure to insert the cable under the clips, if not, the system may not display video after reassembling.
  3. Place the metal bracket and replace the M1.6x2.5 (2) screws to secure the display panel.
  4. Connect the battery cable to the connector on the system board.
  5. Place the metal bracket and replace the M1.6x2.5 (1) screw that secures the connector on the system board.
  6. Install the display panel on the tablet and press the edges until they snap-in. figure displaying Pressing the edges until it snaps in
    • NOTE: The clips on the edges of the display panel must be aligned with the clip holders on the tablet. Press the edge of the display panel to ensure that the clips snap into place.
  7. Replace the M2x4 (4) screws to secure the tablet to the display panel.
  8. Install microSIM card and microSD card.
  9. Follow the procedure in After working inside your tablet .

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\