Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell PowerEdge FC430 Owner's Manual

Installing an SSD into an SSD carrier

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
NOTE: You must remove the SSD from the SSD carrier to replace a faulty SSD from an SSD carrier.
  1. Follow the safety guidelines listed in the Safety instructions section.
  2. Remove the SSD carrier out of the sled.

  3. Remove the SSD from the SSD carrier.

Steps

Insert the SSD into the SSD carrier with the connector end of the SSD toward the back of the carrier. When the SSD is aligned correctly, the back of the SSD is flush with the back of the SSD carrier.
Figure 1. Installing an SSD into an SSD carrier
This image shows installing an SSD into an SSD carrier.
  1. SSD carrier
  2. SSD

Next steps

  1. Install the SSD carrier into the sled.
  2. Follow the procedure listed in the After working inside your system section.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\