Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

SCv3000 and SCv3020 Storage System Owner’s Manual

PDF

Install the Battery Backup Unit

Use this procedure to install the battery backup unit.

Steps

  1. Place the battery backup unit over the battery cage in the storage controller.
  2. Lower the handle until it is flush with the battery. The battery slides into the cage connector.
  3. Remove the service baffle from the chassis.
    • CAUTION: To prevent a thermal shutdown of the storage system, the storage controller must be installed within three minutes of removing the service baffle.
  4. Install the storage controller into the chassis.
  5. Reconnect the cables to the storage controller.
  6. Clear the storage controller swap status from the Hardware tab in Dell Storage Manager . For instructions, see the Storage Manager Administrator’s Guide .

Next steps

  • Use Dell Storage Manager to edit the Storage Center settings and set the operation mode of the Storage Center to Production mode.
  • Use Dell Storage Manager to send SupportAssist information to technical support.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\