XPS 13 Convertible Service Manual

Procedure

1. Slide the palm-rest assembly under the display hinges and align the screw holes on the palm-rest assembly with the screw holes on the display hinges.
2. Replace the six screws (M2.5x3.5) that secure the palm-rest assembly to the display hinges.
3. Close the palm-rest assembly.
4. Connect the display cable to the system board.
5. Align the screw holes on the display-cable bracket with the screw holes on the system board.
6. Replace the two screws (M1.6x2.5) that secure the display-cable bracket to the system board.
7. Adhere the display cable tape to the system board.
8. Connect the touch-screen cable and camera cable to the system board.