- Notes, cautions, and warnings
- Before working inside your computer
- After working inside your computer
- Removing the battery
- Replacing the battery
- Removing the base cover
- Replacing the base cover
- Removing the hard drive
- Replacing the hard drive
- Removing the memory modules
- Replacing the memory modules
- Removing the wireless card
- Replacing the wireless card
- Removing the keyboard
- Replacing the keyboard
- Removing the palm rest
- Replacing the palm rest
- Removing the touch pad
- Replacing the touch pad
- Removing the power-button board
- Replacing the power-button board
- Removing the speakers
- Replacing the speakers
- Removing the I/O board
- Replacing the I/O board
- Removing the system board
- Replacing the system board
- Removing the coin-cell battery
- Replacing the coin-cell battery
- Removing the thermal-cooling assembly
- Replacing the thermal-cooling assembly
- Removing the fan
- Replacing the fan
- Removing the display assembly
- Replacing the display assembly
- Removing the display bezel
- Replacing the display bezel
- Removing the display panel
- Replacing the display panel
- Removing the display hinges
- Replacing the display hinges
- Removing the display back-cover
- Replacing the display back-cover
- Removing the camera
- Replacing the camera
- Removing the power-adapter port
- Replacing the power-adapter port
- Removing the computer base
- Replacing the computer base
- Flashing the BIOS
- Getting help and contacting Dell
Inspiron 14 3000 Service Manual
Procedure
- Follow the procedure from step 1 to step 3 in “ Replacing the speakers”.
- Follow the procedure from step 1 to step 4 in “ Replacing the power-button board ”.
- Follow the procedure from step 1 to step 6 in “ Replacing the touch pad ”.
- Slide the speaker cable through the slot on the computer base.
- Align the screw holes on the palm-rest assembly with the screw holes on the computer base.
- Replace the screws that secure the palm-rest assembly to the computer base.
- Slide the touch-pad cable and the power-button cable into the system board and press down on the latches to secure the cables.
- Close the display and turn the computer over.
- Replace the screws that secure the palm-rest assembly to the computer base.
- Connect the speaker cable to the system board.
- Turn the computer over and open the display.
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Seleccione si el artículo fue útil o no.
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"