- Notes, cautions, and warnings
- Before working inside your computer
- After working inside your computer
- Technical overview
- Removing the side panel
- Replacing the side panel
- Removing the wireless card
- Replacing the wireless card
- Replacing the optical drive
- Removing the optical drive
- Removing the memory module
- Replacing the memory module
- Removing the hard drive
- Replacing the hard drive
- Removing the graphics card
- Replacing the graphics card
- Removing the solid-state drive
- Replacing the solid-state drive
- BIOS setup program
- Flashing the BIOS
- Getting help and contacting Alienware
Alienware X51 Service Manual
Procedure
- Slide the optical drive into the drive cage.
- Align the screw holes on the optical drive with the screw holes on the drive cage.
- Replace the screws that secure the optical drive to the drive cage.
- Slide and place the drive cage into the chassis.
- Connect the optical-drive data and power cable to the optical drive.
- Replace the screw that secures the drive cage to the chassis.
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Seleccione si el artículo fue útil o no.
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"