- Notes, Cautions, and Warnings
- About This Manual
- Introduction
- FluidFS Models and Platforms
- Software Update Paths
- FluidFS File-System Metrics
- Client Network Capabilities
- Customer Environment Management Protocols
- SMB Support
- NFS Support
- FTP Support
- User and Group Quotas
- FluidFS Replication
- VMware and the FluidFS VAAI Plugin
- Integration with Third-Party Products
- Space Pre-Allocation
- Services and Ports
- Management
Dell Fluid File System Version 6.0 Support Matrix
FluidFS Replication
Note the following information regarding FluidFS replication:
- Replication can be performed from FluidFS v5.x to FluidFS v6.x. Replication between systems running different major versions should be performed only during a short-term update, and is not recommended as a normal operating state.
-
Replication partners can differ in network interface speeds (1 GB or 10 GB) or in memory size (24 GB or 48 GB).
| Attribute | Support |
|---|---|
| Maximum number of replication partners | 100 |
| Maximum number of replicated NAS volumes | 1024 |
| Maximum number of concurrent replications (rest are queued) | 10 outgoing and 100 incoming |
| Maximum replication schedules (as source) | 1024 |
| Maximum number of replication bandwidth limiter policies | 100 |
| Single NAS volume to multiple NAS volumes | Up to 10 targets per source |
| Cascading replication of a NAS volume | Up to a depth of 5 |
The following table lists the supported FluidFS replication TCP ports. These target-system ports must be accessible through any firewall from the source system.
| Functionality | Port Numbers |
|---|---|
| Partnership setup | 9445 |
| Management | 10560 or 3260 (configured during partnership setup) |
| Data |
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Seleccione si el artículo fue útil o no.
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"