Dell OpenManage Server Administrator Version 7.4 Command Line Interface Guide

Omconfig Chassis Frontpanel Or Omconfig Mainsystem Frontpanel

Use the omconfig chassis frontpanel or omconfig mainsystem frontpanel command to:

configure the power button and the Nonmasking Interrupt (NMI) button
configure the LCD to display:
- No information
- Custom information
- Default system information
- Service tag, system name
- Remote access MAC addresses
- System power
- Remote access IP address
- Ambient temperature of the system
- Remote access IPv4 address
- Remote access IPv6 address
Specify and configure the LCD line number
View the encryption state report of the LCD
Configure LCD to indicate an active remote session when the Kernel-based Virtual Machine (KVM) is available

NOTE: You can configure the Power and NMI buttons only if they are present on the system.

The following table displays the valid parameters for the command:

Table 1. Valid Parameters Of Omconfig Chassis Frontpanel Or Omconfig Mainsystem Frontpanel
name=value pair 1	name=value pair 2	Description
lcdindex=< index>	NA	Specifies the LCD line number.
config=none \| default \| custom	NA	none: Sets the LCD text to none. default: Sets the LCD text to default. custom: Sets the LCD text to custom.
text=< custom text>	NA	Sets the custom text for LCD when config=custom.
nmibutton=enable \| disable	NA	enable: Enables the NMI button on the system. disable: Disables the NMI button on the system.
powerbutton=enable \| disable	NA	true: Enables the Power button on the system. false: Disables the Power button on the system.
config=sysname	NA	Sets the name of the system.
config=syspower	NA	Sets the system power information.
config=servicetag	NA	Sets the system service tag information.
config=remoteaccessipv4	NA	Sets the remote access IPv4 information.
config=remoteaccessipv6	NA	Sets the remote access IPv6 information.
config=remoteaccessmac	NA	Sets the remote access MAC address.
config=ipv4idrac		Sets IPv4 DRAC information.
config=ipv6idrac		Sets IPv6 DRAC information.
config=macidrac	NA	Sets the DRAC’s MAC address.
config=ambienttemp	NA	Sets the system temperature in centigrade.
security=modify	NA	Allows you to modify the LCD text.
security=view	NA	Provides read-only access to the LCD text.
security=disabled	NA	Provides limited access to the LCD text.
remoteindication=true	NA	LCD flashes when the system detects an active remote session.