Omitir para ir al contenido principal
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.

Dell PowerEdge FC630 Owner's Manual

Installing the Trusted Platform Module

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
  1. Follow the safety guidelines listed in the Safety instructions section.
  2. Follow the procedure listed in the Before working inside your system section.
  1. Locate the Trusted Platform Module (TPM) connector on the system board.
    NOTE: To locate the TPM connector on the system board, see the System board connectors section.
  2. Align the edge connectors on the TPM with the slot on the TPM connector.
  3. Insert the TPM into the TPM connector such that the plastic bolt aligns with the slot on the system board.
  4. Press the plastic bolt until the bolt snaps into place.
    Figure 1. Installing the TPM
    This image shows removing and installing the Trusted Platform Module.
    1. TPM
    2. TPM connector
    3. slot on the TPM connector
    4. plastic bolt
    5. slot on the system board
  1. Install the system board.
  2. Follow the procedure listed in the After working inside your system section.

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"