Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Dell PowerEdge FC630 Owner's Manual

PDF

Installing a PERC H730P slim card

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

  1. Follow the safety guidelines listed in safety instructions section.

  2. Keep the Phillips #2 screwdriver ready.

  1. If installed, remove the PERC H730P slim card blank.
  2. Press the release latch on the side of the chassis to the unlock position.
    NOTE: Ensure that all the memory module ejectors are in the closed position.
  3. Align the slots on the PERC H730P slim card with the standoffs on the side of the chassis.
  4. Lower the PERC H730P slim card into the chassis until the slots on the card engage with the standoffs on the side of the chassis.
  5. Press the release latch to the lock position to secure the card firmly on the chassis.
    The PERC H730P slim card connects to the backplane connector.
  6. Hold the pull tag on the PERC H730 slim-card cable connector and route the cable between the memory-module ejectors.
  7. Align the retention screws on the PERC H730P slim-card cable connector with the screw holes on the system board connector.
  8. Tighten the two retention screws to secure the PERC H730P slim-card cable connector on the system board.
    Figure 1. Installing a PERC H730P slim card
    This image shows Installing a PERC H730P slim card
    1. PERC H730P slim card
    2. PERC H730P release latch
    3. lock and unlock icon on the PERC H730P slim card bracket

Follow the procedure listed in the After working inside your system section.

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"