Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Active System Manager Release 8.1.1 User’s Guide

PDF

Template – deploy virtual machine template clone on VMware cluster

The Deploy Virtual Machine Template Clone on VMWare Cluster template will create a virtual machine clone of a VMware virtual machine template or virtual machine in vCenter.
  • NOTE: Template cloning will not work if vCenter virtual machine template or virtual machine is not configured according to the Active System Manage Quick Installation Guide .

To deploy a VMWare virtual machine clone using this template, perform the following steps:

  1. On the Templates page, select the Deploy Virtual Machine Template Clone on VMWare Cluster template, and click Clone in the right pane.
  2. In the Create Template dialog box, enter a name, category, and description for the template, select the cluster and virtual machine components, and click Save.
  3. On the Template Builder page, click the VMWare Cluster component, click Edit on the dialog box that is displayed, and then configure the following settings in the Cluster Component dialog box:.

    1. From the Target Virtual Machine Manager drop-down list, select the target Virtual Machine Manager instance where the clone will be created

    2. From the Data Center Name drop-down list, select the data center on which virtual machine will be deployed.

    3. From the Cluster Name drop-down list, select the cluster on which virtual machine will be deployed.

  4. Click Save.
  5. On the Template Builder page, click the virtual machine component, click Edit in the dialog box that is displayed, and then configure the following settings for the virtual machine in the Virtual Machine Component dialog box:

    1. Modify the Component Name of the virtual machine, as required.

    2. Under Network Settings, select the network to be associated with the virtual machine.

      • NOTE: Any network selected must be enabled and available on the SCVMM hosts/clusters where the virtual machine will be deployed.

    3. Update the name for the virtual machine clone.

    4. Select the type of clone to be created, if the source is the virtual machine or if the source is a virtual machine template.

    5. From the Source drop-down list, select a valid VMWare virtual machine template or virtual machine that has been prepped according to the instruction provided in the Active System Manager version 6 Quick Installation Guide .

      • NOTE: If the template selected has not been properly prepared, the deployment of the Virtual Machine clone will fail.

    6. Select the datacenter where the source template is located.

  6. Click Save.
  7. Click Publish Template. This template is now ready to be deployed.

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"