Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Dell Wyse ThinLinux 1.0.3 Administrator’s Guide

PDF

Setting the date and time

  1. Click the Date and Time tab to set the date and time on your thin client. The Date and Time screen enables you to set the device’s date, time, time zone and whether or not the device should sync its time with an NTP (Network Time Protocol) server. You can either configure the Date and Time manually or automatically. The date, month and the year along with the time is displayed on the top of the screen. The Time Format can be changed by using the Time Format drop-down list, and the Time Zone can be changed by using the Time Zone drop-down list. The default time zone is America/Los_Angeles. Both changes can be performed regardless of the ON or OFF state of the Set Time Automatically switch.
    • NOTE: By default, the Date and Time screen is available only in Admin mode
    Figure 1. Date and Time Settings
  2. To configure the Date and Time settings manually when the Set Time Automatically switch is in OFF position.
    1. Click the date field and select the year, month and date. Any changes performed in the date field such as, the time format is selected as 24 Hours or an additional AM/PM format, is displayed at the top of screen. The time field consists of Hour and Minute drop-down list.
    2. Click Save to save the changes. Clicking Save when Set Time Automatically switch is in the OFF state also disables NTP synchronization.
      • NOTE: The Date and Time screen detects whether or not the NTP daemon is activated. By default, the NTP daemon is deactivated. The manual setting time zone/date/time page is displayed, if the NTP daemon is deactivated. Otherwise, the auto setting time zone page is displayed.
  3. To configure the Date and Time automatically:
    1. Click the Set Time Automatically button, to turn on the automatic settings. Note that internet access is required to use this option. Turning on this option activates the NTP daemon and enables the NTP daemon to start syncing the device’s time with the specified NTP server.
    2. Click the + icon to add a new NTP server. The NTP Server IP or FQDN box is displayed on the page.
    3. Enter the NTP Server IP or FQDN Server IP in the NTP Server IP or FQDN box. The + icon and x icons are displayed on the right side of the box, when you start typing the characters in the box.
      • Click the + icon to add the specified NTP server/FQDN to the NTP Server list. If a proper NTP server IP is not entered, then a warning message is displayed on the page.
      • Click the x icon to clear the IP address you have entered in the box.
    4. The Del, Up arrow and Down arrow icons are displayed next to the NTP Server name when you hover the mouse over a particular NTP server in the NTP Server list.
      • Click the Del icon to delete the specified NTP server from the NTP Server list.
      • Click Up arrow and Down arrow to change the order of the particular NTP server in the NTP Server list.
      • NOTE:
        • The Up arrow is enabled when the particular NTP server can be moved to the top in the NTP Server list and it is disabled when the particular NTP server is listed at the top of the NTP Server list.
        • Click Down arrow to change the order of the particular NTP by moving it down in the list.
        • The Down arrow is enabled when the particular NTP server can be moved down in the NTP Server list and it is disabled when the particular NTP server is listed at the bottom of the NTP Server list.
  4. Click Save to save the changes. Clicking Save button when Set Time Automatically is in ON position enables NTP synchronization

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"