- Notes, Cautions, and Warnings
- Overview
- Installation
and Quick Start
- Information Prerequisites
- Installing Active
System Manager
- Deployment Prerequisites
- Prerequisites for M1000e (with MXL), S5000, and Compellent
- Prerequisites for Rack Server, S5000, and Compellent
- Prerequisites for M1000e (with MXL), S5000, Brocade, and Compellent
- Prerequisites for Rack Server, S5000, Brocade and Compellent
- Prerequisites for M1000e (with MXL), Cisco Nexus, and Compellent
- Prerequisites for Rack Server, Cisco Nexus, and Compellent
- Prerequisites for M1000e (with MXL), Cisco Nexus, Brocade, and Dell Compellent
- Prerequisites for Rack Server, Cisco Nexus, Brocade, and Dell Compellent
- Prerequisites for M1000e (with MXL and FC FlexIOM), Brocade, and Dell Compellent
- System Center Virtual Machine Manager (SCVMM) Prerequisites
- Deploying ASM from VMware vSphere Client
- Deploying ASM using SCVMM
- Deploying ASM on Hyper-V host
- Rectifying mounting errors during Hyper–V deployment
- Configuring ASM Virtual Appliance
- Customizing Virtual Machine Templates for VMware and Hyper-V
- Configuring ASM Virtual Appliance for NetApp Storage Support
- Completing Initial Configuration
- Installing Windows ADK 8.1.1 for OS Prep for Windows
- Configuring DHCP or PXE on External Servers
Active System Manager Release 8.1.1 Installation Guide
Configuring ASM Virtual Appliance for NetApp Storage Support
For ASM to support NetApp, perform the following tasks:
-
Add NetApp Ruby SDK libraries to the appliance. For more information about adding SDK libraries, see Adding NetApp Ruby SDK
-
Enable HTTP/HTTPs for the NFS share. For more information, see Enabling HTTP or HTTPs for NFS Share
Make sure license is enabled for NFS on NetApp. To obtain and install the license, refer NetApp documentation.
-
Create the credentials to access NetApp Storage. For creating credential, see Active System Manager Release 8.1.1 User’s Guide .
-
Configure the NetApp Storage Component. For more information, see Configuring the NetApp Storage Component
-
Configure the the fileshare Network on the server component. For More information, see Active System Manager Release 8.1.1 User’s Guide
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Seleccione si el artículo fue útil o no.
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"