Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Dell OpenManage Deployment Toolkit Version 4.3 User's Guide

PDF

Installing Linux Using lininst.sh

  • CAUTION: Do not change the bootmode before executing installation scripts using syscfg. If you do, reboot the system and start executing installation scripts.
  • NOTE: See your operating system documentation for instructions on modifying the options in the ks.cfg/ks-rhel5.cfg/ ks-rhel6.cfg/ ks_rhel6_uefi.cfg file to customize the scripted installation of your operating system.

Perform the following steps to install Red Hat Enterprise Linux using the lininst.sh script:

  1. On the source system, navigate to the location of the required Red Hat Enterprise Linux operating system image.
  2. Create a NFS share using the following command: vi /etc/exports.
  3. Share /home/rhelshare.
    • NOTE: If the folder you want to share is /home, then the /etc/exports file must contain the “/home *(rw)” line.
  4. Restart the NFS service.
  5. Copy the operating system image to the NFS share.
  6. Copy initrd.img for Red Hat Enterprise Linux to NFS share.
  7. Copy vmlinuz from Red Hat Enterprise Linux operating system image to NFS share.
  8. Boot DTK on the target machine.
  9. Create the virtual disk using the raidcfg command.
  10. Run the partcfg.sh (at /opt/dell/toolkit/template/scripts/) script to create the Dell utility partition, OS partition in BIOS mode, and to create OS partition in UEFI mode. Ensure that the correct partition is set to DT_HD.
  11. Create a directory under /tmp. For example, os_src.
  12. Mount the NFS Share to /tmp/os_src.
  13. Copy ks.cfg (in BIOS mode) or ks_uefi.cfg (in UEFI mode) from /opt/dell/toolkit/template/configs to NFS share on the source machine.
  14. Edit ks.cfg (in BIOS mode) or ks_rhel6_uefi.cfg (in UEFI mode) on the source system. Set the NFS IP Address where Red Hat Enterprise Linux images are available and the NFS share path.
  15. Export the environment variables as follows:
    1. Run export DT_OS_DISK=/dev/sda, the disk device on which the Dell utility partition was created.
    2. Run export DT_OS_SRC=/tmp/os_src, where vmlinuz, initrd.img, and kickstart file are available.
    3. Run export DT_HD=/dev/sda.
  16. From /opt/dell/toolkit/template/scripts, run /lininst.sh script. The server reboots to the grub prompt. The Red Hat Enterprise Linux operating system unattended installation proceeds.
    • NOTE: For more information on installing, see en.community.dell.com/techcenter/systems-management/w/wiki/1772.dell-openmanage-deployment-toolkit.aspx.

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"