Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners

Sus carritos de compra de Dell.com

Dell OpenManage Server Administrator 版本 7.4 命令行界面指南

PDF

PowerEdge 12G 系统上的 BIOS 设置

下表列出了 PowerEdge 12G 系统上支持的 BIOS 设置属性。在 PowerEdge 12G 系统上，属性是分组的。根据硬件配置，可用的属性在特定的组中可能有所不同。 omconfig chassis biossetup 命令不显示只读属性。
  • 注： 如果您已配置设置密码，请在配置任何 BIOS 设置时始终设置相同密码。
表 1. PowerEdge 12G 系统上的 BIOS 设置
组 名称=值对 1 属性= 名称=值对 2 设置=
BIOS Boot Settings（BIOS 引导设置） attribute=BootSeq sequence=aliasname1, aliasname2,..... aliasnameN
  attribute=HddSeq sequence=aliasname1, aliasname2,..... aliasnameN
Boot Settings（引导设置） attribute=BootMode setting=Bios | Uefi
  attribute=BootSeqRetry setting=Enabled | Disabled
Embedded Server Management（嵌入式服务器管理） attribute=FrontLcd setting=None | UserDefined | ModelNum | Advanced
  attribute=UserLcdStr setting=< string>
Integrated Devices（集成设备） attribute=EmbVideo setting=Enabled | Disabled
  attribute=IntegratedNetwork1 setting=Enabled | DisabledOs
  attribute=IntegratedNetwork2 setting=Enabled | DisabledOs
  attribute=IntegratedRaid setting=Enabled | Disabled
  attribute=IntegratedSas setting=Enabled | Disabled
  attribute=InternalSdCard setting=On | Off
  attribute=InternalSdCardRedundancy setting=Mirror | Disabled
  attribute=InternalUsb setting=On | Off
  attribute=InternalUsb1 setting=On | Off
  attribute=InternalUsb2 setting=On | Off
  attribute=IoatEngine setting=Enabled | Disabled
  attribute=OsWatchdogTimer setting=Enabled | Disabled
  attribute=SriovGlobalEnable setting=Enabled | Disabled
  attribute=UsbPorts setting=AllOn | OnlyBackPortsOn | AllOff
Memory Settings（内存设置） attribute=MemOpMode setting=OptimizerMode | SpareMode | MirrorMode |AdvEccMode | SpareWithAdvEccMode
  attribute=MemOpVoltage setting=AutoVolt | Volt15V
  • 注： Volt15V 代表 1.5 伏。
  attribute=MemTest setting=Enabled | Disabled
  attribute=NodeInterleave setting=Enabled | Disabled
  attribute=SerialDbgOut setting=Enabled | Disabled
  attribute=SysMemSize setting=< string>
  attribute=SysMemSpeed setting=< string>
  attribute=SysMemType setting=< string>
  attribute=SysMemVolt setting=< string>
  attribute=VideoMem setting=< string>
Miscellaneous Settings（其他设置） attribute=AssetTag setting=< string>
  attribute=Characterization setting=Enabled | Disabled
  attribute=ErrPrompt setting=Enabled | Disabled
  attribute=NumLock setting=On | Off
  attribute=ReportKbdErr setting=Report | NoReport
  attribute=SystemUefiShell setting=Enabled | Disabled
One-Time Boot（一次性引导） attribute=OneTimeBootMode setting=Disabled | OneTimeBootSeq | OneTimeHddSeq | OneTimeUefiBootSeq | OneTimeCustomBootSeqStr | OneTimeCustomHddSeqStr | OneTimeCustomUefiBootSeqStr
  attribute=OneTimeBootSeqDev sequence=aliasname1, aliasname2,..... aliasnameN
  attribute=OneTimeHddSeqDev sequence=aliasname1, aliasname2,..... aliasnameN
  attribute=OneTimeUefiBootSeqDev sequence=aliasname1, aliasname2,..... aliasnameN
Processor Settings（处理器设置） attribute=DataReuse setting=Enabled | Disabled
  attribute=DcuIpPrefetcher setting=Enabled | Disabled
  attribute=DcuStreamerPrefetcher setting=Enabled | Disabled
  attribute=LogicalProc setting=Enabled | Disabled
  attribute=Proc1Brand setting=< string>
  attribute=Proc1Id setting=< string>
  attribute=Proc1L2Cache setting=< string>
  attribute=Proc1L3Cache setting=< string>
  attribute=Proc1NumCores setting=< integer>
  attribute=Proc2Brand setting=< string>
  attribute=Proc2Id setting=< string>
  attribute=Proc2L2Cache setting=< string>
  attribute=Proc2L3Cache setting=< string>
  attribute=Proc2NumCores setting=< integer>
  attribute=Proc3Brand setting=< string>
  attribute=Proc3Id setting=< string>
  attribute=Proc3L2Cache setting=< string>
  attribute=Proc3L3Cache setting=< string>
  attribute=Proc3NumCores setting=< integer>
  attribute=Proc4Brand setting=< string>
  attribute=Proc4Id setting=< string>
  attribute=Proc4L2Cache setting=< string>
  attribute=Proc4L3Cache setting=< string>
  attribute=Proc4NumCores setting=< integer>
  attribute=Proc64bit setting=< string>
  attribute=ProcAdjCacheLine setting=Enabled | Disabled
  attribute=ProcBusSpeed setting=< string>
  attribute=ProcCores setting=Single | All | Dual | Quad | 1 | 2 | 4 | 6 | 8 | 10 | 12 | 14 | 16
  attribute=ProcCoreSpeed setting=< string>
  attribute=ProcExecuteDisable setting=Enabled | Disabled
  attribute=ProcHwPrefetcher setting=Enabled | Disabled
  attribute=ProcVirtualization setting=Enabled | Disabled
  attribute=QpiBandwidthPriority setting=InputOutput | Compute
  attribute=QpiSpeed setting=MaxDataRate | 8GTps | 7GTps | 6GTps
  attribute=RtidSetting setting=Enabled | Disabled
  attribute=EmbSata setting=Off | AtaMode | RaidMode | AhciMode
  attribute=eSataPort1 setting=Off | Auto
  attribute=eSataPort1Capacity setting=< string>
  attribute=eSataPort1DriveType setting=< string>
  attribute=eSataPort1Model setting=< string>
  attribute=SataPortA setting=Off | Auto
  attribute=SataPortACapacity setting=< string>
  attribute=SataPortADriveType setting=< string>
  attribute=SataPortAModel setting=< string>
  attribute=SataPortB setting=Off | Auto
  attribute=SataPortBCapacity setting=< string>
  attribute=SataPortBDriveType setting=< string>
  attribute=SataPortBModel setting=< string>
  attribute=SataPortC setting=Off | Auto
  attribute=SataPortCCapacity setting=< string>
  attribute=SataPortCDriveType setting=< string>
  attribute=SataPortCModel setting=< string>
  attribute=SataPortD setting=Off | Auto
  attribute=SataPortDCapacity setting=< string>
  attribute=SataPortDDriveType setting=< string>
  attribute=SataPortDModel setting=< string>
  attribute=SataPortE setting=Off | Auto
  attribute=SataPortECapacity setting=< string>
  attribute=SataPortEDriveType setting=< string>
  attribute=SataPortEModel setting=< string>
  attribute=SataPortF setting=Off | Auto
  attribute=SataPortFCapacity setting=< string>
  attribute=SataPortFDriveType setting=< string>
  attribute=SataPortFModel setting=< string>
  attribute=SataPortG setting=Off | Auto
  attribute=SataPortGCapacity setting=< string>
  attribute=SataPortGDriveType setting=< string>
  attribute=SataPortGModel setting=< string>
  attribute=SataPortH setting=Off | Auto
  attribute=SataPortHCapacity setting=< string>
  attribute=SataPortHDriveType setting=< string>
  attribute=SataPortHModel setting=< string>
Serial Communication（串行通信） attribute=ConTermType setting=Vt100Vt220 | Ansi
  attribute=ExtSerialConnector setting=Serial1 | Serial2 | RemoteAccDevice
  attribute=FailSafeBaud setting=115200 | 57600 | 19200 | 9600
  attribute=RedirAfterBoot setting=Enabled | Disabled
  attribute=SerialComm setting=OnNoConRedir | OnConRedirCom1 | OnConRedirCom2 | Off
  attribute=SerialPortAddress setting=Serial1Com1Serial2Com2 | Serial1Com2Serial2Com1 | Com1 | Com2
Slot Disablement（插槽禁用） attribute=Slot1 setting=Enabled | Disabled | BootDriverDisabled
  attribute=Slot2 setting=Enabled | Disabled | BootDriverDisabled
  attribute=Slot3 setting=Enabled | Disabled | BootDriverDisabled
  attribute=Slot4 setting=Enabled | Disabled | BootDriverDisabled
  attribute=Slot5 setting=Enabled | Disabled | BootDriverDisabled
  attribute=Slot6 setting=Enabled | Disabled | BootDriverDisabled
  attribute=Slot7 setting=Enabled | Disabled | BootDriverDisabled
System Information（系统信息） attribute=SysMfrContactInfo setting=< string>
  attribute=SystemBiosVersion setting=< string>
  attribute=SystemManufacturer setting=< string>
  attribute=SystemModelName setting=< string>
  attribute=SystemServiceTag setting=< string>
System Profile Settings（系统配置文件设置） attribute=MemFrequency setting=MaxPerf | 1600MHz | 1333MHz |1067MHz | 800MHz | MaxReliability
  attribute=MemPatrolScrub setting=Standard | Extended | Disabled
  attribute=MemRefreshRate setting=1x | 2x
  attribute=MemVolt
setting=AutoVolt | Volt15V | Volt135V
  • 注： Volt15V 代表 1.5 伏，Volt135V 代表 1.35 伏
  attribute=ProcC1E setting=Enabled | Disabled
  attribute=ProcCStates setting=Enabled | Disabled
  attribute=ProcPwrPerf setting=MaxPerf | MinPwr | SysDbpm | OsDbpm
  attribute=ProcTurboMode setting=Enabled | Disabled
  attribute=SysProfile setting=PerfPerWattOptimizedOs | PerfPerWattOptimizedDapc | PerfOptimized | Custom | DenseCfgOptimized
System Security（系统安全） attribute=AcPwrRcvry setting=On | Off | Last
  attribute=AcPwrRcvryDelay setting=Immediate | User | Random
  attribute=AcPwrRcvryUserDelay setting=< integer>
  attribute=AesNi setting=Enabled | Disabled
  attribute=BiosUpdateControl setting=Unlocked | Limited | Locked
  attribute=IntelTxt setting=On | Off
  attribute=NmiButton setting=Enabled | Disabled
  attribute=PasswordStatus setting=Locked | Unlocked
  attribute=PwrButton setting=Enabled | Disabled
  attribute=SetupPassword setting=< string>
  attribute=SysPassword setting=< string>
  attribute=TcmActivation setting=NoChange | Activate | Deactivate
  attribute=TcmClear
  • 警告： 如果清除 TCM，则会导致 TCM 中的所有密钥丢失。这可能会影响操作系统的引导。
setting=Yes | No
  attribute=TcmSecurity setting=On | Off
  attribute=TpmActivation setting=NoChange | Activate | Deactivate
  attribute=TpmClear
  • 警告： 如果清除 TPM，则会导致 TPM 中的所有密钥丢失。这可能会影响操作系统的引导。
setting=Yes | No
  attribute=TpmSecurity setting=Off | OnPbm | OnNoPbm
UEFI 引导设置 attribute=UefiBootSeq sequence=aliasname1, aliasname2,..... aliasnameN

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"