- Notes, cautions, and warnings
- About this document
- Cabling the
systems
- 2x1—DSMS 630 and DSMS 1400 series
- 2x1—DSMS 630 or 730 and DSMS 3060e
- 2x1—DSMS 730 and DSMS 1400 series
- 2x2—DSMS 630 and DSMS 1400 series
- 2x2—DSMS 730 and DSMS 1400 series
- 2x3—DSMS 630 and DSMS 1400 series
- 2x3—DSMS 730 and DSMS 1400 series
- 2x4—DSMS 630 and DSMS 1400 series
- 2x4—DSMS 730 and DSMS 1400 series
- 2x2—DSMS 630 or 730 and DSMS 3060e
- 2x3—DSMS 730 and DSMS 3060e
- 2x3—DSMS 630 and DSMS 3060e
- 2x4—DSMS 730 and DSMS 3060e
- 2x4—DSMS 630 and DSMS 3060e
- 3x3—DSMS 630 or 730 and DSMS 3060e
- 3x3—DSMS 630 and DSMS 1400 series
- 3x3—DSMS 730 and DSMS 1400 series
- 3x4—DSMS 630 and DSMS 1400 series
- 3x4—DSMS 730 and DSMS 1400 series
- 3x4—DSMS 630 or 730 and DSMS 3060e
- 4x3 — DSMS 630 and DSMS 1400 Series
- 4x3—DSMS 730 and DSMS 1400 Series
- 4x4—DSMS 630 and DSMS 1400 series
- 4x4—DSMS 730 and DSMS 1400 series
- 4x4—DSMS 630 or 730 and DSMS 3060e
- Getting help
Dell Storage with Microsoft Storage Spaces Cabling Guide
Cabling the systems
This section provides information about cabling the system and supported configuration details.
When you are
ready to cable your servers and enclosures, use the port numbers described
in the section
Server and enclosure
port numbering
along with the cabling diagrams and tables to correctly connect
your servers and storage enclosures.
Supported configurations
are listed in the following rules and guidelines:
- Every server has two connections to every enclosure.
- When using the DSMS 1400 with the DSMS 730, each server must have one SAS HBA for each enclosure (up to four enclosures).
- When using the DSMS 3060e, for configurations having more than two servers and up to four enclosures, cabling between enclosures (enclosure to enclosure connections) is required at the rear end.
- A single HBA cannot have multiple connections to the same enclosure.
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Seleccione si el artículo fue útil o no.
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"