- Notes, cautions, and warnings
- Working on your computer
- Removing and installing components
- Technology and components
- Troubleshooting your computer
- System Setup
- System Setup
Options
- System Setup overview
- Accessing System Setup
- System setup
options
- General screen options
- System configuration screen options
- System Configuration screen options
- Security screen options
- Secure boot screen options
- Intel Software Guard Extensions options
- Performance screen options
- Power management screen options
- POST behavior screen options
- Virtualization support screen options
- Maintenance screen options
- System Log screen options
- SupportAssist System Resolution options
- Technical specifications
- Contacting Dell
Dell Vostro 3660/3669 Owner's Manual
Installing the optical drive assembly
- Place the optical drive bracket on the optical drive.
- Tighten the M2L2 screws to secure the optical drive bracket to the optical drive.
- Insert the optical drive assembly into the optical drive bay.
- Tighten the 6-32xL3.6 screw to secure the optical drive assembly to the computer.
- Open the front panel door.
- Route the data cable and power cable under the drive cage.
- Connect the data cable and power cable to the connectors on the optical drive assembly .
- Close the front panel door.
- Install the:
- Follow the procedure in After working inside your computer .
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Seleccione si el artículo fue útil o no.
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"