Dell FluidFS Version 6.0 FS8600 Appliance Deployment Guide

The subnet on which you enable secured management must exist prior to enabling the secured management feature.

1. In the Storage view, select a FluidFS cluster.
2. Click the File System tab.
3. In the File System view, select Cluster Connectivity, and then click the Management Network tab.
4. In the Management Network panel, click Edit Settings. The Modify Administrative Network dialog box opens.
5. From the State drop-down list, select a state to be used for the management network.
   • Select Restricted for management functionality to be blocked on other subnets
   • Select Unrestricted for management functionality to be available on all subnets.
6. To change the prefix of the network, type a prefix length in the Prefix field.
7. In the Network ID field, type the ID for the network that you want to modify.
8. Add one or more management VIPs through which the administrator manages the FluidFS cluster.
   1. In the Virtual IP field, type a management virtual IP address.
   2. In the box for the Controller IP Address field, type a controller IP address and click Add. Repeat this step for each controller.
9. To specify a VLAN tag, type a VLAN tag in the VLAN Tag field. When a VLAN spans multiple switches, the VLAN tag is used to specify which ports and interfaces to send broadcast packets to.
10. From the Interface drop-down list, select the interface on which the secured management subnet is located.
    • Select Admin to use the LOM Ethernet port for physical isolation of management traffic. You must also connect a network cable to the LOM Ethernet port of each controller in the first (or only) appliance.
    • Select Client for subnet-level isolation of management traffic.
11. Click OK.