Dell PowerEdge FC630 Owner's Manual

System board connectors

Table 1. System board connectorsItem 1 is the battery connector. Item 2 is the storage connector. Item 3 is the Memory module sockets Connector. Item 4 is the Processor socket 2 connector. Item 5 is the PERC H730P Slim PERC card connector. Item 6 is the Processor socket 1 connector. Item 7 is the Memory module sockets (processor 1) connector. Item 8 is the IDSDM/rSPI card connector. Item 9 is the PCIe mezzanine card connector for the expansion bus connector. Item 10 is the PCIe mezzanine card connector for the expansion bus connector. Item 11 is the SD vFlash card connector. Item 12 is the Network daughter card connector. Item 13 is the Memory module sockets (processor 1) connector. Item 14 is the System configuration jumpers connectors. Iem 15 is the Memory module sockets (processor 2) connector. Item 16 is the USB connector. Item 17 is the USB connector. Item 18 is the TPM connector. Item 19 is the Hard-drive backplane connector.
Item	Connector	Description
1	BATTERY	Connector for the 3.0 V coin cell battery
2	STORAGE	Storage controller card connector
3	B3, B7, B11, B4, B8, B12	Memory module sockets (processor 2)
4	CPU2	Processor socket 2
5	J_PCIE_SEARAY	PERC H730P Slim PERC card connector
6	CPU1	Processor socket 1
7	A1, A5, A9, A2, A6, A10	Memory module sockets (processor 1)
8	IDSDM/rSPI	IDSDM or rSPI card connector
9	MEZZ1_FAB_C	PCIe mezzanine card connector for the expansion bus
10	MEZZ2_FAB_B	PCIe mezzanine card connector for the expansion bus
11	VFLASH	SD vFlash card connector
12	bNDC	Network Daughter Card connector
13	A3, A7, A11, A4, A8, A12	Memory module sockets (processor 1)
14	PWRD_EN, NVRAM_CLR	System configuration jumpers NOTE: Access needs removal of system board.
15	B1, B5, B9, B2, B6, B10	Memory module sockets (processor 2)
16	USB2	USB connector
17	USB1	USB connector
18	TPM	TPM connector
19	J_BP	Hard drive backplane connector