- Notes, Cautions, and Warnings
- About This Manual
- Introduction
- FluidFS Models and Platforms
- Software Update Path
- FluidFS File-System Metrics
- Client Network Capabilities
- Customer Environment Management Protocols
- SMB Support
- NFS Support
- FTP Support
- User and Group Quotas
- FluidFS Replication
- VMware and the FluidFS VAAI Plugin
- Antivirus Support
- Space Pre-Allocation
- Backup and Restore – NDMP
- Services and Ports
- Management
- Internationalization
Dell Fluid File System Version 5.0 Support Matrix
Supported Hardware Upgrades
Note the information in the following sections about hardware upgrades.
1GbE FC to 10GbE FC Controller Upgrade
FS8600 1GbE FC configurations can be upgraded to 10GbE FC by replacing the network interface cards (NICs). Contact Dell Technical Support for details about this upgrade.24-GB and 48-GB Appliances
The 48-GB FS8600 appliance supports 48-GB controllers only. The 24-GB FS8600 appliance supports 24-GB and 48-GB controllers; however, 48-GB controllers in a 24-GB appliance are limited to 24 GB.Appliance Replacement
A 24-GB FS8600 appliance can be replaced with a 24-GB or 48-GB appliance.A 48-GBFS8600 appliance can be replaced with a 48-GB appliance only.
All appliances in the system must be equal in terms of client connectivity type (1GbE or 10GbE), storage connectivity type (FC or iSCSI), and port count.
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Seleccione si el artículo fue útil o no.
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"