Dell OpenManage Deployment Toolkit Version 4.3 Command Line Interface Reference Guide

PDF

Sub Options And Arguments For power Option

Table 1. Sub-options and Arguments for the power Option
Option	Sub-option	Arguments	Description
`power`	`--profile`	< powerprofile> where powerprofile can be maxperformance, osctl, apc	Displays the settings similar to the BIOS setup screen for the respective profile. Reboot the system for the settings to take effect. If power profiles are not available on the platform, an error message is displayed. A:>syscfg power--profile=maxperformance --setuppwdoverride
		custom	Creates the custom profile. Reboot the system for the settings to take effect. A:>syscfg power --profile=custom --setuppwdoverride
	`--cpupowermode`	min, max, osdbpm, systemdbpm	Allows you to set the CPU power and performance management to minimum power, maximum performance, operating system DBPM, or system DBPM mode. Example: A:>syscfg power --profile=custom --cpupowermode=min --setuppwdoverride
	`--memorypowermode`	min, 978, 800, 1067, 1333, max	Allows you to set memory power and performance management to minimum power mode, maximum power mode, 978 Mhz, 800 Mhz, 1067 Mhz, or 1333 Mhz. A:>syscfg power --profile=custom --memorypowermode=min --setuppwdoverride
	`--fanpowermode`	min, max	Allows you to set the fan algorithm to the minimum power optimized or maximum performance optimized mode. A:>syscfg power --profile=custom --fanpowermode=min --setuppwdoverride NOTE: Set the value of profile to custom to change the values of cpupowermode , memorypowermode , and fanpowermode.
	`--profile`	NA	Displays the profile set and the respective profile parameters.
	`--cap` NOTE: This option is available only with the appropriate installed license.		Displays the values of budgetcap, and the maximum and minimum power thresholds in Watts.
	`--cap<budgetcap> --unit<unit>` NOTE: This option is available only with the appropriate installed license.	< budgetcap> is the limit for power consumption in Watts, or btuphr, or percent. < unit> is the unit of the < budgetcap> value and can be watt, or btuphr, or percent.	The value of <budgetcap> must be between the maximum and minimum threshold values, else an error is displayed. If the value is less than the minimum threshold value, a warning message appears. If the unit is btuphr, it is converted in to Watts using the formula Watt = BTU/hr /3.413. If the unit is percent, the formula is Power Cap (Watts) = [Power supply rating for input power (Watts) - Min potential power (Watts)] * Power Cap (%) + Min potential power (Watts)] Example: A:>syscfg power --cap=< value> --unit=watt --setuppwdoverride
	`--maxpowercap`		Displays the value of the maximum power threshold.
	`--minpowercap`		Displays the value of the minimum power threshold.
	`--valsetuppwd`	< string>	Validates the setup password for power authentication. If you try to change the DTK settings, you are prompted to enter this password to access the settings. For more information on delimiters, see Command Line Option Delimiters . A:>syscfg power --profile= maxperformance --valsetuppwd= <setup_password>
	`--setuppwdoverride`	NA	Does not prompt you for a password to access the DTK settings on systems that do not have a setup password configured. A:>syscfg power --profile= maxperformance –setuppwdoverride