Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Créez et accédez à une liste de vos produits
  • Gérer vos sites, vos produits et vos contacts au niveau des produits Dell EMC à l’aide de la rubrique Gestion des informations de l’entreprise.

Dell Latitude E6540 Owner's Manual

Removing the Display Assembly

Steps

  1. Follow the procedures in Before Working Inside your computer.
  2. Remove:
    1. battery
    2. display-hinge cap
    3. base cover
    4. base-corner cover
  3. Disconnect the antenna cables connected to the WLAN card and release it from the routing channel. Disconnect the camera cable from the system board.
    Figure displaying how to remove the WLAN antenna and camera cable from the system board.
  4. Disconnect the LVDS cable and release the LVDS cable and camera cable from the routing channel. Remove them from the computer.
    Figure displaying how to remove the LVDS cable and camera cable from the computer.
  5. Remove the screws that secure the display assembly to the computer.
    Figure displaying how to remove the screw that secures the display assembly to the computer.
  6. Remove the display assembly from the computer.
    Figure displaying how to remove the display assembly from the computer.

Évaluez ce contenu

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
0/3000 characters
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez indiquer si l’article a été utile ou non.
  Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\