Dell OpenManage Deployment Toolkit Version 4.3 Command Line Interface Reference Guide

DTK Utilities General Usage

The following table lists the general usage models of the DTK utilities:

Table 1. DTK Utilities
Utilities	Usage
SYSCFG	syscfg --option1=[arg1] ... --optionX=[argX] or syscfg bmcoption1 --bmcsuboption1=[arg1]...--bmcsuboptionX=argX]
RAIDCFG	raidcfg [mandatory options] <optional arguments>
RACADM	racadm <options> <subcommand> <subcommand_options> NOTE: The Command Line Reference Guide for iDRAC6 and CMC available on dell.com/support/manuals provides information about the RACADM subcommands, supported interfaces, property database groups and object definitions for iDRAC6 and CMC.
UPINIT	For WinPE: upinit --disk=0 --size=32 --file=t:\upimage.bin For Linux: upinit --disk=/dev/sda --size=32 --file=/tmp/upimage.bin

The DTK command line switches, configuration file formatting, and error reporting follow similar style and behavior. However, individual DTK utilities can sometimes differ from one another in significant ways. You must familiarize yourself with the command line syntax and utility-specific options and arguments for each utility before using DTK.

NOTE: Some of the command line options in DTK are followed by an asterisk. Such options are used for reporting purposes only.

Bienvenue

Bienvenue dans l’univers Dell

Dell OpenManage Deployment Toolkit Version 4.3 Command Line Interface Reference Guide

DTK Utilities General Usage

Évaluez ce contenu