Dell OpenManage Server Administrator Version 7.3 Command Line Interface Guide

Omreport Chassis Memory Or Omreport Mainsystem Memory

Use the omreport chassis memory or omreport mainsystem memory to view details for each memory module slot in the system. If the system supports redundant memory, this command also displays the status, state, and type of memory redundancy implemented on the system. Type:

omreport chassis memory index=n

omreport mainsystem index=n

The index parameter is optional. If you do not specify the index, Server Administrator displays information for all memory modules on the system as follows:

The following is an example output:

`Memory Information`

`Health`	`: Ok`

`Attributes of Memory Array(s)`
`Location`	`: System Board or Motherboard`
`Use`	`: System memory`
`Installed Capacity`	`: 65536 MB`
`Maximum Capacity`	`: 786432 MB`
`Slots Available`	`: 24`
`Slots Used`	`: 8`
`Error Correction`	`: Multibit ECC`

`Total of Memory Array(s)`
`Total Installed Capacity`	`: 65536 MB`
`Total Installed Capacity Available to the OS`	`: 64386 MB`
`Total Maximum Capacity`	`: 786432 MB`

`Details of Memory Array 1`
`Index`	`: 0`
`Status`	`: Ok`
`Status`	`: Ok`
`Status`	`: Ok`
`Connector Name`	`: DIMM_A1`
`Type`	`: DDR3 - Synchronous Registered (Buffered)`
`Size`	`: 8192 MB`
`Index`	`: 1`
`Status`	`: Ok`
`Connector Name`	`: DIMM_A2`
`Type`	`: DDR3 - Synchronous Registered (Buffered)`
`Size`	`: 8192 MB`

`Index`	`: 2`
`Status`	`: Ok`
`Connector Name`	`: DIMM_A3`
`Type`	`: DDR3 - Synchronous Registered (Buffered)`
`Size`	`: 8192 MB`

`Index`	`: 3`
`Status`	`: Ok`
`Connector Name`	`: DIMM_A4`
`Type`	`: DDR3 - Synchronous Registered (Buffered)`
`Size`	`: 8192 MB`

If you specify the index, Server Administrator displays a summary for a specific memory module displaying the health, status, device name, type, speed, rank, and failures. A rank is a row of dynamic random access memory (DRAM) devices comprising 64 bits of data per Dual Inline Memory Module (DIMM). The possible values of rank are single, dual, quad, octal, and hexa. The rank displays the rank of the DIMM and helps in the easy service of DIMMs on the server.

The following is an example output if you specify the index:

`Memory Device Information`

`Health : Ok`

`Status`	`: Ok`
`Device Name`	`: DIMM_A1`
`Size`	`: 8192 MB`
`Type`	`: DDR3 Synchronous Registered (Buffered)`
`Speed`	`: 0.75 ns`
`Rank`	`: Dual`
`Failures`	`: None`

NOTE: To maintain consistency across the commands, the output format of this command and the subsequent command levels has changed. Change the user scripts as applicable.

Bienvenue

Bienvenue dans l’univers Dell

Dell OpenManage Server Administrator Version 7.3 Command Line Interface Guide

Omreport Chassis Memory Or Omreport Mainsystem Memory

Évaluez ce contenu