Dell Chassis Management Controller Version 1.3 for PowerEdge FX2/FX2s RACADM Command Line Reference Guide

connect

Description	Connects to the switch or server serial console.
Synopsis	`racadm connect [-b] —m <module>` `racadm connect [-b] < server-n>` `racadm connect [-b] < switch-n>`
Input	`-b` — Connects to the switch or console using the binary mode. This is an optional argument; a server or a switch must be present. NOTE: If you use the `-b` option, reset the CMC to terminate the connect operation. `server-<n>`: where `n` = 1 to 4 `server —<nx>`: where `n` = 1 to 4 and `x` = a to d (lower case) NOTE: The values 2 and 4 for `n` are valid only for multi-node sleds. `switch-n`: where `n` = 1 to 2 or <a1 \| a2>
Examples	Connect to I/O Module 1 serial console racadm connect -m switch-1 Connect to server 1 serial console racadm connect -m server-1